| Issue |
Title |
File |
| Vol 20, No 4 (2024) |
Strength of Normal Sections of Flexural Reinforced Concrete Elements Damaged by Corrosion and Strengthened with External Composite Reinforcement |
(Eng)
|
|
Rimshin V.I., Suleymanova L.A., Amelin P.A.
|
| Vol 20, No 4 (2024) |
Design of Thin-Walled Single-Curvature Parts for Use in Lightweight Structures |
(Rus)
|
|
Morozov Y.A., Belelyubskiy B.F.
|
| Vol 20, No 3 (2024) |
Method for Calculating Assembly Stresses in Frame Structures Strengthened in Deformed State |
(Rus)
|
|
Serazutdinov M.N., Ubaydulloev M.N.
|
| Vol 20, No 3 (2024) |
Stability Analysis and Comparison of Conventional Concrete and Expanded Polystyrene Concrete Spherical Shells |
(Eng)
|
|
Sereke I.A., Rynkovskaya M.I., Damir H.Y.
|
| Vol 20, No 3 (2024) |
Robustness of Reinforced Concrete Frame with Respect to its Service Life |
(Rus)
|
|
Savin S.Y., Stupak M.I., Mankov D.K.
|
| Vol 20, No 2 (2024) |
Effect of Sinusoidal Fiber Waviness on Non-Linear Dynamic Performance of Laminated Composite Plates with Variable Fiber Spacing |
(Eng)
|
|
Mohammed W.H., Shambina S.L., Ammash H.K.
|
| Vol 20, No 2 (2024) |
Parameterization of Maxwell - Cremona Diagram for Determining Forces in Elements of a Scissors Truss |
(Eng)
|
|
Repin V.A., Lukina A.V., Strekalkin A.A.
|
| Vol 20, No 1 (2024) |
Modern Theory of Creep of Reinforced Concrete |
(Rus)
|
|
Beglov A.D., Sanjarovskiy R.S., Ter-Emmanuilyan T.N.
|
| Vol 20, No 1 (2024) |
Behavior of Metal Frame of Ribbed-ring Dome with Decrease in Number of Supporting Columns |
(Rus)
|
|
Lebed E.V.
|
| Vol 19, No 5 (2023) |
Generation a solution to the equations of elasticity theory for a layered strip basing on the principle of compressed mappings |
(Rus)
|
|
Zveryaev E.M., Rynkovskaya M.I., Hoa V.D.
|
| Vol 19, No 5 (2023) |
Influence of the size of the upper ring on the stressed state of the ribbed-ring metal dome |
(Eng)
|
|
Lebed E.V.
|
| Vol 19, No 5 (2023) |
Reducing sensitivity to initial imperfections by changing bifurcation diagrams |
(Rus)
|
|
Manuylov G.A., Kositsyn S.B., Grudtsyna I.E.
|
| Vol 19, No 6 (2023) |
Formulas for Fundamental Natural Frequency of Plane Periodic Truss |
(Eng)
|
|
Kirsanov M.N.
|
| Vol 19, No 6 (2023) |
Evaluation of Soil Structure Interaction Effects on Seismic Response of RC Framed Buildings Using Simplified Method |
(Eng)
|
|
Timilsina P., Ghimire C.R., Chaulagain H.
|
| Vol 19, No 3 (2023) |
Methodology for determining progressing ultimate states based on the displacement method |
(Eng)
|
|
Stupishin L.Y., Nikitin K.E., Moshkevich M.L.
|
| Vol 19, No 3 (2023) |
Compaction of the snow base of Vostok station wintering complex |
(Rus)
|
|
Pashchenko F.A., Kharkov N.S., Sidorenko A.A., Garbuzov V.V.
|
| Vol 19, No 3 (2023) |
Flexural stiffness of lightweight steel-concrete slab panels made of low-density foam concrete |
(Rus)
|
|
Rybakov V.A.
|
| Vol 19, No 3 (2023) |
Method of computational models of resistance for reinforced concrete |
(Rus)
|
|
Kolchunov V.I.
|
| Vol 19, No 2 (2023) |
Strengthening of reinforced concrete structures by composite materials taking into consideration the carbonization of concrete |
(Eng)
|
|
Rimshin V.I., Truntov P.S.
|
| Vol 19, No 2 (2023) |
Theory of short-term and long-term resistance of structures based on the principle of plastic fracture |
(Rus)
|
|
Beglov A.D., Sanzharovskiy R.S., Ter-Emmanuilyan T.N.
|
| Vol 19, No 2 (2023) |
Rational structural solutions for triangular trusses |
(Rus)
|
|
Repin V.A., Lukina A.V., Usov A.S.
|
| Vol 19, No 1 (2023) |
Calculation of the formation of normal cracks in a reinforced concrete element based on the deformation theory of plasticity of concrete by G.A. Geniev |
(Eng)
|
|
Vu N.T., Fedorova N.V.
|
| Vol 19, No 1 (2023) |
Modal analysis of a large-span building with different boundary conditions |
(Rus)
|
|
Kuzhakhmetova E.R., Sutyrin V.I.
|
| Vol 19, No 1 (2023) |
Theoretical basis for the development of a program for the evaluation of road bridge heavy vehicles capacity |
(Rus)
|
|
Lugovtsev E.A., Utaliev K.N., Chutkov K.A.
|
| Vol 19, No 1 (2023) |
Evaluation of a reliability index for steel trusses to the deflection criterion with interval uncertainty of data |
(Rus)
|
|
Solovev S.A., Inkov A.E., Soloveva A.A.
|
| Vol 18, No 5 (2022) |
Justification of the parameters of regulationof forces for steel-reinforced concrete span structures from project “43282 km” by TSNIIPSK |
(Eng)
|
|
Belutsky I.Y., Kudryavtsev S.A., Lazarev I.V.
|
| Vol 18, No 6 (2022): Scientific Legacy of Academician Vitaly Mikhailovich Bondarenko |
Analytical model of deformation of reinforced concrete columns based on fracture mechanics |
(Eng)
|
|
Tamrazyan A.G., Chernik V.I., Matseevich T.A., Manaenkov I.K.
|
| Vol 18, No 5 (2022) |
The influence of bracing on the stress state of the ribbed-ring dome framework |
(Rus)
|
|
Lebed E.V.
|
| Vol 18, No 6 (2022): Scientific Legacy of Academician Vitaly Mikhailovich Bondarenko |
Basic principles in the theory of force and thermal force resistance of concrete |
(Eng)
|
|
Fedorov V.S., Levitsky V.E., Isaeva E.A.
|
| Vol 18, No 5 (2022) |
Peculiarities of the condition of the foundation slab of the pumped storage power plant water intake |
(Rus)
|
|
Lisichkin S.E., Kotitsyna S.S.
|
| Vol 18, No 6 (2022): Scientific Legacy of Academician Vitaly Mikhailovich Bondarenko |
Non-equilibrium and nonlinear processes in robustness potential evaluation of reinforced concrete structural systems in ultimate states |
(Rus)
|
|
Androsova N.B., Kolchunov V.I., Emelyanov S.G.
|
| Vol 18, No 6 (2022): Scientific Legacy of Academician Vitaly Mikhailovich Bondarenko |
Investigation of the properties of high-strength steel fiber concrete with a minimum effective fiber content under loads of various durations |
(Rus)
|
|
Karpenko N.I., Moiseenko G.A.
|
| Vol 18, No 6 (2022): Scientific Legacy of Academician Vitaly Mikhailovich Bondarenko |
Stability of shallow shells with local changes in strength characteristics |
(Rus)
|
|
Kolesnikov A.G., Osadchaya A.V.
|
| Vol 18, No 6 (2022): Scientific Legacy of Academician Vitaly Mikhailovich Bondarenko |
Numerical-analytical method in reinforced concrete mechanics |
(Rus)
|
|
Kolchunov V.I.
|
| Vol 18, No 6 (2022): Scientific Legacy of Academician Vitaly Mikhailovich Bondarenko |
Relaxation of stress in elements of reinforced concrete structures |
(Eng)
|
|
Larionov E.A., Nazarenko V.G., Rynkovskaya M.I., Grinko E.A.
|
| Vol 18, No 6 (2022): Scientific Legacy of Academician Vitaly Mikhailovich Bondarenko |
Fluctuations of pipelines of gas-containing liquids under changing bearing conditions |
(Rus)
|
|
Leontiev Y.V., Travush V.I.
|
| Vol 18, No 6 (2022): Scientific Legacy of Academician Vitaly Mikhailovich Bondarenko |
Numerical calculation of bent reinforced concrete elements of rectangular section in the Abaqus software |
(Rus)
|
|
Rimshin V.I., Amelin P.A.
|
| Vol 18, No 5 (2022) |
Physical and mechanical properties of pre-bound aggregate composites |
(Eng)
|
|
Erofeev V.T., Kaznacheev S.V., Pankratova E.V., Seleznev V.A., Tyuryahina T.P.
|
| Vol 18, No 6 (2022): Scientific Legacy of Academician Vitaly Mikhailovich Bondarenko |
Stability exposure of building structural systems under environmental damage |
(Eng)
|
|
Savin S.Y., Fedorova N.V.
|
| Vol 18, No 4 (2022) |
Fundamentals of technology theory of production, calculation physical and mechanical properties and indicators chemical and biological properties of frame building composites |
(Rus)
|
|
Erofeev V.T.
|
| Vol 18, No 4 (2022) |
Deformation of reinforced concrete frames of multi-storey buildings in extreme conditions under special influences |
(Rus)
|
|
Kolchunov V.I., Bushova O.B.
|
| Vol 18, No 4 (2022) |
Analysis of the field studies of the foundation deformations and total draft of the Boguchansk HPP concrete dam |
(Rus)
|
|
Yuriev S.V.
|
| Vol 18, No 4 (2022) |
Trihedral lattice supports geometry optimization according to the stability criterion |
(Rus)
|
|
Akhtyamova L.S., Yazyev B.M., Chepurnenko A.S., Sabitov L.S.
|
| Vol 18, No 3 (2022) |
Survivability of reinforced concrete frames of multi-storey buildings with complex stress elements |
(Rus)
|
|
Kolchunov V.I., Moskovtseva V.S.
|
| Vol 18, No 3 (2022) |
Rigidity, adhesion and delamination of the coating in the “substrate - coating” system |
(Rus)
|
|
Yakupov S.N., Gubaidullin R.I.
|
| Vol 18, No 3 (2022) |
Analysis for the efficiency of additional dispersed reinforcement using coconut fiber for a concrete beam with traditional steel bar reinforcement |
(Eng)
|
|
Chongo P., Shambina S.L., Tembo O.
|
| Vol 18, No 2 (2022) |
Nonlinear and linear analysis of the overall stability of the load-bearing system of a high-rise building with a load-bearing trunk |
(Rus)
|
|
Inozemtseva O.V., Inozemtsev V.K.
|
| Vol 18, No 2 (2022) |
Forced oscillations of a multimodular beam on a viscous elastic base |
(Rus)
|
|
Rzayev N.S.
|
| Vol 18, No 2 (2022) |
Optimization of channels and I-shaped bended closed profiles with perforated walls |
(Rus)
|
|
Marutyan A.S.
|
| Vol 18, No 1 (2022) |
Bulking of physically nonlinear plates under the action of dynamic shearing loads |
(Rus)
|
|
Ivanov S.P.
|
| Vol 18, No 1 (2022) |
Determination of the survivability parameters of a reinforced concrete spatial frame operating under conditions of a complex stress state |
(Rus)
|
|
Osovskikh O.E., Osovskikh E.V., Travush V.I.
|
| Vol 18, No 1 (2022) |
Rheological equations of concrete state and relaxation of stress |
(Rus)
|
|
Larionov E.A., Rynkovskaya M.I., Grinko E.A.
|
| Vol 18, No 1 (2022) |
A method for strengthening arched buildings with insufficient bearing capacity of supports for the perception of the strut |
(Rus)
|
|
Khusainov D.M., Salimov A.F., Khabibulina A.G.
|
| Vol 17, No 5 (2021) |
The influence of mounted assembly process on the stress-strain state of the lattice dome frame |
(Rus)
|
|
Lebed E.V.
|
| Vol 17, No 5 (2021) |
The theory of calculation of reinforced concrete structures and the principles of the Eurocode |
(Eng)
(Rus)
|
|
Sanzharovskiy R.S., Sieber F., Ter-Emmanuilyan T.N.
|
| Vol 17, No 5 (2021) |
Case study on structural health assessment for existing reinforced concrete building |
(Eng)
|
|
Adhikari K.P., Lamichhane G.P., Lamichhane K., Ghimire K.
|
| Vol 17, No 5 (2021) |
A new direction for calculating the strength of bent reinforced concrete elements along inclined sections with an example of calculating an experimental beam |
(Rus)
|
|
Starishko I.N.
|
| Vol 17, No 4 (2021) |
Justification of the development and application of express assessment programs for road bridges when heavy vehicles pass through them |
(Rus)
|
|
Lugovtsev E.A.
|
| Vol 17, No 4 (2021) |
Stress-strain state of reinforced concrete structures of the LN-1 and LN-2 retaining walls of Zagorskaya PSPP taking into account the opening of interblock joints and the formation of secondary cracks |
(Rus)
|
|
Khanov N.V., Pashchenko F.A.
|
| Vol 17, No 3 (2021) |
Theoretical foundations for calculating bridges for endurance using the kinetic theory of durability of structural materials |
(Rus)
|
|
Salamakhin P.M., Lugovtsev E.A.
|
| Vol 17, No 3 (2021) |
Roll-over stability as a problem of high-rise buildings’ designing |
(Rus)
|
|
Inozemtseva O.V., Inozemtsev V.K., Murtazina G.R.
|
| Vol 17, No 3 (2021) |
Innovation structures of very lean roller compacted concrete dams |
(Eng)
(Rus)
|
|
Lyapichev Y.P.
|
| Vol 17, No 3 (2021) |
Inverted pyramid Azores - an eternal hybrid structure |
(Eng)
|
|
Sarmento Esteves L.P.
|
| Vol 17, No 2 (2021) |
The method of compensating loads for solving of problems of cyclic symmetrical flexure of anisotropic plates, resting on an elastic subgrade |
(Rus)
|
|
Koreneva E.B.
|
| Vol 17, No 2 (2021) |
Mathematical modeling of stress waves under concentrated vertical action in the form of a triangular pulse: Lamb’s problem |
(Rus)
|
|
Musayev V.K.
|
| Vol 17, No 2 (2021) |
Joint operation of the cellular structure as a system “frame - filling ground - base” |
(Rus)
|
|
Zimnyukov V.A., Zborovskaya M.I.
|
| Vol 17, No 2 (2021) |
Structural analysis of high-rise building using ETABS and RSA software |
(Eng)
|
|
Pechorskaya S.A., Galishnikova V.V., Gebreslassie S.B., Damir H.Y.
|
| Vol 17, No 2 (2021) |
Optimization of channels and I-shaped bended closed profiles with tubular shelves from sheets of different thicknesses |
(Rus)
|
|
Marutyan A.S.
|
| Vol 17, No 1 (2021) |
Geometrically nonlinear analysis of the stability of the stiffened plate taking into account the interaction of eigenforms of buckling |
(Rus)
|
|
Manuylov G.A., Kositsyn S.B., Grudtsyna I.E.
|
| Vol 17, No 1 (2021) |
Calculated assessment of the impact of geometric deviations from the design on the parameters of mechanical safety of building metal structures within the framework of scientific and technical support for construction |
(Rus)
|
|
Belostotsky A.M., Dmitriev D.S., Petryashev S.O., Nagibovich T.E.
|
| Vol 16, No 3 (2020) |
Theory of the calculation of the reinforced concrete and inconsistency it to Eurocode |
(Rus)
|
|
Sanjarovskiy R.S., Sieber F., Ter-Emmanuilyan T.N., Manchenko M.M., Musabaev T.T., Gadzhiev M.A.
|
| Vol 16, No 3 (2020) |
Damage analysis and assessment of the impact of damage on the operation of supporting structures of oil refining tube furnaces |
(Rus)
|
|
Golikov A.V., Subbotin D.I.
|
| Vol 16, No 3 (2020) |
The trends and practical look of advanced steel frame structures |
(Eng)
|
|
Vatin N.I., Gebre T.H., Gebreslassie S.B.
|
| Vol 16, No 1 (2020) |
Substantiation of the necessity and method of upgrading the software of the measuring complex for assessing the load capacity of girder spans of road bridges |
(Rus)
|
|
Salamakhin P.M., Lugovtsev E.A.
|
| Vol 16, No 4 (2020) |
Modeling of random static loads on a structural cover with limited statistical data |
(Rus)
|
|
Solovev S.A.
|
| Vol 16, No 1 (2020) |
The effectiveness of the implementation of pile foundations on the example of the reactor building of a nuclear power plant with VVER-1000 |
(Rus)
|
|
Sargsyan A.E., Gukova E.G.
|
| Vol 16, No 4 (2020) |
Modeling of a piled foundation in a Femap with NX Nastran |
(Rus)
|
|
Kuzhakhmetova E.R.
|
| Vol 16, No 1 (2020) |
Effect of joint stiffness and flexibility on the design of reinforced cement concrete structure |
(Eng)
|
|
Lamichhane G.P., Giri P.
|
| Vol 16, No 5 (2020) |
Multitudes of Voigt - Reuss forks and Voigt - Christensen - Reuss tridents |
(Rus)
|
|
Erofeev V.T., Tyuryakhin A.S., Tyuryakhina T.P.
|
| Vol 16, No 2 (2020) |
Probabilistic estimation seismic resistance of spatial steel frame under earthquake |
(Rus)
|
|
Mkrtychev O.V., Bulushev S.V.
|
| Vol 16, No 5 (2020) |
I-shaped bent closed profiles with tubular shelves and calculation of the optimal layout of their composite sections |
(Rus)
|
|
Marutyan A.S.
|
| Vol 16, No 2 (2020) |
Stress-strain state cylinder-plate-cable-stayed roof buildings (structures) with various forms of external support contour |
(Rus)
|
|
Kuzhakhmetova E.R.
|
| Vol 16, No 5 (2020) |
Analytical assessment of the frequency of natural vibrations of a truss with an arbitrary number of panels |
(Rus)
|
|
Kirsanov M.N.
|
| Vol 16, No 2 (2020) |
Stress state of metal dome meridional ribs at different stages of overhang erection process |
(Rus)
|
|
Lebed E.V., Vershinin V.P.
|
| Vol 16, No 6 (2020) |
Influence of cover splices on the stress-strain state of plate-ribbed wood-composite panels |
(Rus)
|
|
Labudin B.V., Popov E.V., Oshchepkova E.S., Sopilov V.V., Ruslanova A.V., Fukalov A.A.
|
| Vol 16, No 3 (2020) |
Calculation of building structures for several dynamic effects with a static accounting of higher forms of oscillation |
(Rus)
|
|
Lalin V.V., Le T.Q.
|
| Vol 16, No 6 (2020) |
Influence of the height of the ribbed-ring dome on the stress state of its frame during the overhang mounting process |
(Rus)
|
|
Lebed E.V.
|
| Vol 16, No 3 (2020) |
Calculation of the deflection of an arched truss with suspended elements depending on the number of panels |
(Rus)
|
|
Kirsanov M.N.
|
| Vol 16, No 6 (2020) |
The software part, the fundamental and organizational structure of the software and hardware complex to ensure the safety of hydraulic and hydropower structures under the construction |
(Rus)
|
|
Antonov A.S.
|
| Vol 15, No 2 (2019) |
Development of the design module of the software and hardware complex to ensure the safety of mutually influencing HPS |
(Rus)
|
|
Rubin O.D., Antonov A.S., Bellendir E.N., Kobochkina E.M., Kotlov O.N.
|
| Vol 15, No 6 (2019) |
Comparative calculation of optimal parameters of channel bent and bent closed profiles |
(Rus)
|
|
Marutyan A.S.
|
| Vol 15, No 3 (2019) |
Method of full discretization in joint calculation in time of the system “construction - foundation - soil” |
(Eng)
|
|
Ter-Emmanuilyan T.N., Polumordvinov I.O.
|
| Vol 15, No 6 (2019) |
Numerical studies of strength of concrete cylinders for compression |
(Rus)
|
|
Mkrtychev O.V., Andreev M.I.
|
| Vol 15, No 3 (2019) |
Rationalization of the constructive form of towers with prestressed cables |
(Rus)
|
|
Sitnikov I.R., Golikov A.V.
|
| Vol 15, No 3 (2019) |
The results of computer analysis of the wind load acting on the set of rolled profiles |
(Rus)
|
|
Veselev Y.A., Karabutov M.S.
|
| Vol 15, No 4 (2019) |
Numerical analysis of mechanical safety parameters of Congress Hall building in Chelyabinsk |
(Rus)
|
|
Belostotsky A.M., Akimov P.A., Dmitriev D.S., Pavlov A.S., Dyadchenko Y.N., Nagibovich A.I.
|
| Vol 15, No 1 (2019) |
System of insufficiency of the modern theory of long-term resistance of reinforced concrete and designers’ warnings |
(Mlt)
|
|
Sanzharovsky R.S., Manchenko M.M., Hadzhiev M.A., Musabaev T.T., Ter-Emmanuilyan T.N., Varenik K.A.
|
| Vol 15, No 4 (2019) |
Theory of “dissolution” and “condensation” of the physical geometric characteristics of an arbitrary cross-section under the action of torsion with bending |
(Rus)
|
|
Kolchunov V.I., Demyanov A.I., Naumov N.V.
|
| Vol 15, No 1 (2019) |
A comparative study of beam design curves against lateral torsional buckling using AISC, EC and SP |
(Eng)
|
|
Galishnikova V.V., Gebre T.H.
|
| Vol 15, No 4 (2019) |
Criteria of strength of walls from large masonry blocks |
(Rus)
|
|
Pyatikrestovsky K.P.
|
| 1 - 100 of 127 Items |
1 2 > >>
|
