No 4 (2012)

Articles

Methodical aspects of pupils’ engineering education organization through the subject-laboratory network class creating

Ponomarev N.K., Okolnikov F.B., Sokolov I.V.

Abstract

Methodical aspects of organization of the technical education of pupils through a network of subject-laboratory classes have been described. A scheme for the implementation of the technical education with the goal of sustainabledevelopment of the«school-university» system have been proposed.
RUDN Journal of Engineering Research. 2012;(4):5-9
pages 5-9 views

Analysis of a new framework program of the european union for scientific, technological and innovation development “HORIZON 2020”

Kirabaev N.S., Vorobiev A.E., Kaukenova A.S.

Abstract

The article analyzes the new framework program of the European Union's scientific, technological and innovation development. There are major initiatives of the program, the objectives and main priorities that the program will be. We also give priority goals and budget.
RUDN Journal of Engineering Research. 2012;(4):10-14
pages 10-14 views

The main approaches to measuring the quality of student learning in higher education institutions

Vorobiev A.E., Roman A.T.

Abstract

On trends and systems of higher education. New forms of learning and completely new programs. A brief comparative analysis of the scientific component, independent work of students and the principle of Scholarships for students in the CIS countries, and in countries abroad.
RUDN Journal of Engineering Research. 2012;(4):15-23
pages 15-23 views

Some feature geology-geopohysical models of placer deposits of diamants

Abramov V.Y., Brovkin V.I.

Abstract

Make an example a feature petrophysical property and geology-geophysical models of placer deposits of diamonds of North Ural. Make a effect mode of geological task determination with geophysical methods.
RUDN Journal of Engineering Research. 2012;(4):24-29
pages 24-29 views

Тreatment of mineral waste uranium mine by resource-saving technologies

Chekushina T.V., Chekushina E.V.

Abstract

In article questions environmental pollution uranium mining industry. A theoretical model of the interaction of the masses and fields. Assess the critical flow rate of leaching solution. In a review of research and data practices.
RUDN Journal of Engineering Research. 2012;(4):30-35
pages 30-35 views

Modern applied problems hydrosphere and innovative solutions of them

Roman A.T.

Abstract

In the article are considered the basic problems of depletion of clean water. A brief quantitative analysis. Detail the physical constants of water. The characteristic of the geological cycle of mass transport of groundwater.
RUDN Journal of Engineering Research. 2012;(4):36-42
pages 36-42 views

About analytic profiling of turbine blades

Vinogradov L.V.

Abstract

An article presents an analytic method for designing the turbine blade profiles.
RUDN Journal of Engineering Research. 2012;(4):43-48
pages 43-48 views

Discreet method for derivation of formulas for free ciclic freguences of oscillating bars with distributeol masses

Borzyg E.P.

Abstract

The paper deals with the problem jf automated derivation of the formulas for cyclys freguences.
RUDN Journal of Engineering Research. 2012;(4):49-51
pages 49-51 views

Regulation of diesel by variation of physical - chemical and motor properties of fuel

Patrakhaltsev N.N., Strashnov S.V., Kornev B.A., Melnik I.S.

Abstract

There are examined a problem of diesel regulation by variation of physical-chemical and motor properties of fuel during the working process of engine. The composition of fuel is changed by addition some alternative fuels and other addтitives to base diesel fuel. The method is realized by using of fuel system with regulation of initial fuel pressure.
RUDN Journal of Engineering Research. 2012;(4):52-56
pages 52-56 views

The study of the influence mode cuttings under fine sharpening on quality of the surfaces

Rogov V.A., Belov P.S.

Abstract

Experimental studies of the influence of the different forms of the insertions are organized in work in holder boring cutter on quality (the roughness) processed to surfaces. Findings are made about influence concrete design on quality processed to surfaces.
RUDN Journal of Engineering Research. 2012;(4):57-66
pages 57-66 views

Developmnet of the automobile explosion engine performance with direct injection of gasoline

Fomin V.M., Ramzi H.J., Platunov A.S.

Abstract

Here are analyzed the problem questions which are connected with perspective working out of domestic automobile petrol engines of new generation with internal carburetion which stimulates necessity to search the means and the new technical decisions which can be suitable for domestic engine engineering. The method of developing automobile explosion engine performance of the given type has been suggested as an alternative variant, which is based on the use of hydrogen as a chemical reagent.
RUDN Journal of Engineering Research. 2012;(4):67-80
pages 67-80 views

About the integration of coputer and engineering graphics courses for engineer specialties

Timofeeva T.V., Nesterenko M.A.

Abstract

The review of teaching properties of computer and engineering graphics courses and the possibilities of it’s merging. The analysis of conditions of studying quality and student interest in study process increase.
RUDN Journal of Engineering Research. 2012;(4):81-83
pages 81-83 views

On application and analysis of helicoidal shells in architecture and civil engineering

Rynkovskaya M.I.

Abstract

There is the review article of application and calculation of helicoidal shells in architecture and civil engineering. Helicoidal shells are used as ramps, winding staircases, screws, elements of bore machines and so on. Different numerical methods are widely used nowadays, but analytic methods need research. There is also information about author's computer programs written in MathCad for analysis of shallow right and open helicoids. The method of Rekach was corrected by the author and led to numerical results. Analytical method of S.N. Krivoshapko was simplified by author due to the application of Bernoulli numbers in the process of integration of equations. The author suggests using mentioned programs for rough analyses of helicoids instead of expensive program complexes based on numerical methods.
RUDN Journal of Engineering Research. 2012;(4):84-90
pages 84-90 views

Analysis of initial stresses in a sectorial-lattice dome during installation as an assembled structure in comparison with a star-lattice dome

Lebed E.V., Eterevsky V.A.

Abstract

The article presents the results of a computer-based research on the nature of the initial stresses in the bars of one-layer sectorial-lattice dome that arise from the deformation of the framework during its erection as a wholly assembled structure. Comparative analysis of the possible initial internal forces in the bars has been performed for various cases of the initial support, as well as for different types of probabilistic combination of tolerances. Obtained results are compared with the results of a similar research performed earlier for the star-lattice dome.
RUDN Journal of Engineering Research. 2012;(4):91-98
pages 91-98 views

Priorities of graphic programs in computer designing

Aigunian M.A.

Abstract

This article examines methodological aspects of computer graphics teaching and teaching of computer architectural designing with existing variety of graphic editors.
RUDN Journal of Engineering Research. 2012;(4):99-101
pages 99-101 views

The network operator method in a problem of synthesis for control system of dynamic object with random initial values

Diveev A.I., Sofronova E.A., Pham Xuan Phang -.

Abstract

A general problem synthesis of control system for object with random initial values is considered. To solve the problem it’s proposed to use the network operator method. An example of decision of a control system synthesis problem for an aircraft on a stage of descent is presented.
RUDN Journal of Engineering Research. 2012;(4):102-110
pages 102-110 views

Effect of water-permeable foundation layer thickness on filtration flow data with approximate e quality of dam body and its foundation filtration factors

Elfimov V.I., Kumerov D.E.

Abstract

Hydraulic (approximate) method is used to analyze filtration flow data of earth dams emplaced on water-permeable foundation of different thickness with approximate equality of dam body and its foundation filtration factors. Redetermination necessity of filtration flow data was discovered as a result of comparative analysis of water-permeable foundation layer thickness effect on filtration flow data.
RUDN Journal of Engineering Research. 2012;(4):111-117
pages 111-117 views

Cyclic surfaces with directrix meridians of the base surface of revolution

Ivanov V.N.

Abstract

The questions of forming of the cyclic surfaces with plane of parallelism made by the circle of the changed radius moving on two meridians of the base surface of revolution are concern. There received the vector equation of the surfaces. It is shown that on the base of those surfaces there may be constructed varies shells of umbrella type. There shown drawings of some cyclic surfaces and surfaces of umbrella type with different base surfaces of revolution.
RUDN Journal of Engineering Research. 2012;(4):118-124
pages 118-124 views

Modern approaches to designing of many-storeyed housing estates in conditions hot-arid climate (on an example of the UNITED ARAB EMIRATES)

Korshunova N.N., Ahmed Inshasi A.

Abstract

In article modern problems of space-planning, constructive solutions of modern perspective multipurpose housing estates in the conditions of a hot arid climate, with emphasis on national features of the United Arab Emirates are considered. MSHE are the complexes which are carrying out a set of functions, uniting in itself the dwelling, expanded typological structure, establishment of service, culture, communication, entertainments, and also offices and trading enterprises. The architectural solution of MSHE is a result of architectural judgment of a number of objective factors: climatic, economic, social conditions, town-planning situation, space-planning structure of a complex, its constructive scheme, techno
RUDN Journal of Engineering Research. 2012;(4):125-128
pages 125-128 views

State infrastructure of life maintenance of the cities of iraq and their reliability indicators

Kharun M., Al-Harami Tami -.

Abstract

Maintenance, inspection and repair of drainage pipes are characterised by increased responsibility for their technical condition and quality of work. This allows more efficient use of economic, logistical and human resources in the maintenance of pipelines.
RUDN Journal of Engineering Research. 2012;(4):129-134
pages 129-134 views

Forecasting of an environmental setting by the designed program of a computer of detection of chemical interactions

Volshanik V.V., Babayev B.D.

Abstract

In the article are adduced a technique of detection of chemical interactions between n-components participating in processes and the operational procedure with the designed program of a computer at forecasting an environmental setting.
RUDN Journal of Engineering Research. 2012;(4):135-140
pages 135-140 views

Innovative business potential as a factor of development of the modern enterprise

Alexeenko V.B., Krasavina V.A.

Abstract

The paper reveals the theoretical foundations of research innovation potential of the industrial enterprise. The analysis of dynamics of innovative processes in Russia is given and strategic priorities of innovative and technological development are allocated. The possible ways of solving the problem of transformation of the Russian economy in innovation economy are considered. We believe the innovative structure as a basis for ensuring the innovation process in Russia.
RUDN Journal of Engineering Research. 2012;(4):141-149
pages 141-149 views

Nashi avtory

- -.
RUDN Journal of Engineering Research. 2012;(4):150-153
pages 150-153 views

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies