MOUNTING STRESS-STRAIN STATE OF JOINT-ROD COVERINGS OF DEPARTMENT OF BALLS AND REAGENTS

Cover Page

Cite item

Full Text

Abstract

This article gives an overview of previously carried out work on the accuracy of the calculation, determine the mounting loads of metal structures. Given the results of the study of the mounting stress-strain state, which occurs in structures-span hinge-rod cover warehouse balls and reagents. Numerical study of the mounting stress-strain state is made by finite element method, which is implemented in the computing complex SCAD. Also, see impact assessment values installation effort on the carrying capacity of the individual rods coated. Presentation of the efforts made in the form of histograms. The values obtained efforts indicate that the development of measures necessary to reduce the value of the initial forces generated during assembly cover and respectively the geometrical deviations in the coating in its design

About the authors

А М YUGOV

Donbas National Academy of Civil Engineering and Architecture

Author for correspondence.
Email: amyrus@mail.ru

DSc (Eng.), professor

286123, г. Макеевка, ул. Державина, 2

А B BОNDAREV

Joint Stock Company "Matrosov Mine" (JSC «RiM»)

Email: bondarev_a_b_rus@mail.ru

engineer

685000, Магадан, ул. Пролетарская, д. 12

References

  1. Aroshenko M. Gordeev M., Lebedich I. Secrets of steel structures. Kiev.2004. 304 p.
  2. Bondarev A.B. The Method of Determination of Mounting Stress-Strain State-Span Hinge-Rod Metal Coatings. Metal Constructions. 2016. Volume 22. No. 2. pp. 67-82.
  3. Bondarev A.B., Yugov A.M. Тhe method of calculating the accuracy of large-span metal rod systems. Magazine of Civil Engineering, 2016. No. 1(61). pp. 60-73.
  4. Bondarev A.B., Yugov A.M. Evaluation of installation efforts in metal coatings, allowing for assembly process. Magazine of Civil Engineering. 2015. No. 4(56), pp. 28-37.
  5. Bondarev A.B. Deviations in assembly hinged-rod metal coating. Construction of Unique Buildings and Structures. 2015. No. 3(30). pp. 98-110.
  6. Dobromyslov A.N. The errors of structural design: Scientific publication. Moscow. ASV. 2007. 184 p.
  7. Drobot D.Y. Vitality-span metal coatings: the thesis submitted for the Scientific Degree on competition of Candidate of Engineering. Moscow. 2010. 212 p.
  8. Efimov O.I. Impact of compliant connections and nodal eccentricity on the work of the structural units: the thesis submitted for the Scientific Degree on competition of Candidate of Engineering. Kazan. 1982. 152 p.
  9. Kuznetsov I.L. Stripped out construction arch buildings (Research, development, implementation): The thesis for the degree of Doctor of Technical Sciences. Kazan. 1995. 426 p.
  10. Lebed E.V., Shebalina O.V. Analysis of distortions of the geometric shape in the assembly of composite. Metal Structures. Industrial Construction. 1992. No. 5. pp. 23-24.
  11. Lebed, E.V., Eterevsky V.A. Analysis of initial stresses in a sectorial-lattice dome during installation as an assembled structure in comparison with a starlattice dome. Bulletin of Peoples’ Friendship University of Russia. Series: Engineering Researches. 2012. No. 4. pp. 91-98.
  12. Lebed E.V., Grigoryan A.A. Influence of assembly analytical models of the ribs of a double-layer metal dome on the initial forces in case of elimination of imperfections. Proceedings of Moscow State University of Civil Engineering. 2015. No. 8. pp. 66-79.
  13. Lebed E.V., Grigoryan A.A. Examination of initial efforts in two-zone metal dome while eliminating mounting errors of annular. Proceedings of Moscow State University of Civil Engineering. 2016. No. 4. pp. 36-51.
  14. Lebed E.V., Shebalina O.V. Calculation of the Accuracy of Composite Structures Assembling. Industrial and Civil Engineering. 1993. No. 9. pp. 27-28.
  15. Lebed E.V. Computer Modeling of the Accuracy of Erecting Two-Layer Metal Domes. Industrial and Civil Engineering. 2013. No. 12. pp. 89-92.
  16. Lebed E.V. Eterevsky V.A. Initial stresses in the bars of a one-layer lattice dome due to the imperfections of its form during installation as an assembled structure. Proceedings of Moscow State University of Civil Engineering. 2011. Vol. 2. No. 2. pp. 137-144.
  17. Lebed E.V. Particularities of numerical simulation of carcassing of single-grid dome. Bulletin of Volgograd State University of Architecture and Civil Engineering. Series: Civil Engineering and Architecture. 2003. Issue 3(9). pp. 81-86.
  18. Lebed E.V. Forecasting of errors of large-span metal dome construction based on geometric modeling of their installation: the thesis submitted for the Scientific Degree on competition of Candidate of Engineering. Moscow. 1988. 171 p.
  19. Savelev V.A., Lebed E.V., Shebalina O.V. Mathematical Modeling of Spatial Structures Installation. Industrial Construction. 1991, No. 1. pp. 18-20.
  20. Savelyev V.A. Theoretical foundations of metal cupolas: Author’s abstract the thesis submitted for the Scientific Degree on competition of Doctor of Engineering. Moscow. 1995. 40 p.
  21. Khusainov D.M. Improving the quality of manufacturing design and installation of lightweight frame arch buildings: the dissertation for the degree of Candidate of Technical Sciences Kazan. 1996. 252 p.
  22. Bondarev A.В., Yugov A.М. The Method of Generating Large-Span Rod Systems with the Manufacturer Defect and Assembly Sequence. Procedia Engineering. 2015. Vol. 117. рр. 953-963.
  23. Bujakas V.I., Gvamichava A.S., Rybakowa A.G. Petal-Type Deployable Space Antennas for Radio Astronomy. Proceedings of Progress in Electromagnetic Research Symposium (PIERS). Hong Kong. 1997. Vol. 2. рр. 380.
  24. Gaul L., Albrecht H., Wirnitzer J. Semi-active friction damping of large space truss structures. Shock and Vibration. 2004. Vol. 11. рр. 173-186.
  25. Kaouk Zimmerman Structural damage assessment using a generalized minimum rank perturbation theory. Proceedings of the 34th AlAA SDM Conference. La Jolla. California. 1993. рр. 1529-1538.
  26. Kartal M.E., Basaga H.B., Bayraktar A., Muvafık M. Effects of semi-rigid connection on structural responses. Electronic Journal of Structural Engineering. 2010. Vol. 10. рр. 22-35.
  27. Kaveh A., Nouri M. Weighted graph products for configuration processing of planar and space structures. International Journal of Space Structures. Vol. 24. No. 1. 2009. рр. 13-26.
  28. Kim H.M., Doiron H.H. On-orbit modal identification of large space structures. Sound and Vibration. Vol. 26. No. 6. 1992. рр. 24-30.
  29. Makowski Z.S. Development of jointing systems for modular prefabricated steel space structures. Proceedings of the international symposium. Warsaw: Poland. 2002. рр. 17-41.
  30. Preumont, A. Vibration control of active structures an introduction 2-nd Edition. New York, Boston, Dordrecht, London, Moscow: Kluwer Academic Publishers, 2004. 385 p.
  31. Tsou P., Shen M.-H. Structural damage detection and identification using neural network. Proceedings of the 34th. SDM Conference. La Jolla, California. 1993. рр. 3551-3560.
  32. Yin Yue Huang Xin, Han Qinghua, Bai1 Linjia Study on the accuracy of response spectrum method for long span reticulated shells. International Journal of Space Structures 2009. Vol. 24. No. 1. рр. 27-35.

Copyright (c) 2017 YUGOV А.М., BОNDAREV А.B.

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies