Analysis and design of building structures

Issue Title File
Vol 18, No 3 (2022) Survivability of reinforced concrete frames of multi-storey buildings with complex stress elements PDF

(Rus)

Kolchunov V.I., Moskovtseva V.S.
Vol 18, No 3 (2022) Rigidity, adhesion and delamination of the coating in the “substrate - coating” system PDF

(Rus)

Yakupov S.N., Gubaidullin R.I.
Vol 18, No 3 (2022) Analysis for the efficiency of additional dispersed reinforcement using coconut fiber for a concrete beam with traditional steel bar reinforcement PDF

(Eng)

Chongo P., Shambina S.L., Tembo O.
Vol 18, No 2 (2022) Nonlinear and linear analysis of the overall stability of the load-bearing system of a high-rise building with a load-bearing trunk PDF

(Rus)

Inozemtseva O.V., Inozemtsev V.K.
Vol 18, No 2 (2022) Forced oscillations of a multimodular beam on a viscous elastic base PDF

(Rus)

Rzayev N.S.
Vol 18, No 2 (2022) Optimization of channels and I-shaped bended closed profiles with perforated walls PDF

(Rus)

Marutyan A.S.
Vol 18, No 1 (2022) Bulking of physically nonlinear plates under the action of dynamic shearing loads PDF

(Rus)

Ivanov S.P.
Vol 18, No 1 (2022) Determination of the survivability parameters of a reinforced concrete spatial frame operating under conditions of a complex stress state PDF

(Rus)

Osovskikh O.E., Osovskikh E.V., Travush V.I.
Vol 18, No 1 (2022) Rheological equations of concrete state and relaxation of stress PDF

(Rus)

Larionov E.A., Rynkovskaya M.I., Grinko E.A.
Vol 18, No 1 (2022) A method for strengthening arched buildings with insufficient bearing capacity of supports for the perception of the strut PDF

(Rus)

Khusainov D.M., Salimov A.F., Khabibulina A.G.
Vol 17, No 5 (2021) The influence of mounted assembly process on the stress-strain state of the lattice dome frame PDF

(Rus)

Lebed E.V.
Vol 17, No 5 (2021) The theory of calculation of reinforced concrete structures and the principles of the Eurocode PDF

(Eng)

PDF

(Rus)

Sanzharovskiy R.S., Sieber F., Ter-Emmanuilyan T.N.
Vol 17, No 5 (2021) Case study on structural health assessment for existing reinforced concrete building PDF

(Eng)

Adhikari K.P., Lamichhane G.P., Lamichhane K., Ghimire K.
Vol 17, No 5 (2021) A new direction for calculating the strength of bent reinforced concrete elements along inclined sections with an example of calculating an experimental beam PDF

(Rus)

Starishko I.N.
Vol 17, No 4 (2021) Justification of the development and application of express assessment programs for road bridges when heavy vehicles pass through them PDF

(Rus)

Lugovtsev E.A.
Vol 17, No 4 (2021) Stress-strain state of reinforced concrete structures of the LN-1 and LN-2 retaining walls of Zagorskaya PSPP taking into account the opening of interblock joints and the formation of secondary cracks PDF

(Rus)

Khanov N.V., Pashchenko F.A.
Vol 17, No 3 (2021) Theoretical foundations for calculating bridges for endurance using the kinetic theory of durability of structural materials PDF

(Rus)

Salamakhin P.M., Lugovtsev E.A.
Vol 17, No 3 (2021) Roll-over stability as a problem of high-rise buildings’ designing PDF

(Rus)

Inozemtseva O.V., Inozemtsev V.K., Murtazina G.R.
Vol 17, No 3 (2021) Innovation structures of very lean roller compacted concrete dams PDF

(Eng)

PDF

(Rus)

Lyapichev Y.P.
Vol 17, No 3 (2021) Inverted pyramid Azores - an eternal hybrid structure PDF

(Eng)

Sarmento Esteves L.P.
Vol 17, No 2 (2021) Optimization of channels and I-shaped bended closed profiles with tubular shelves from sheets of different thicknesses PDF

(Rus)

Marutyan A.S.
Vol 17, No 2 (2021) The method of compensating loads for solving of problems of cyclic symmetrical flexure of anisotropic plates, resting on an elastic subgrade PDF

(Rus)

Koreneva E.B.
Vol 17, No 2 (2021) Mathematical modeling of stress waves under concentrated vertical action in the form of a triangular pulse: Lamb’s problem PDF

(Rus)

Musayev V.K.
Vol 17, No 2 (2021) Joint operation of the cellular structure as a system “frame - filling ground - base” PDF

(Rus)

Zimnyukov V.A., Zborovskaya M.I.
Vol 17, No 2 (2021) Structural analysis of high-rise building using ETABS and RSA software PDF

(Eng)

Pechorskaya S.A., Galishnikova V.V., Gebreslassie S.B., Damir H.Y.
Vol 17, No 1 (2021) Geometrically nonlinear analysis of the stability of the stiffened plate taking into account the interaction of eigenforms of buckling PDF

(Rus)

Manuylov G.A., Kositsyn S.B., Grudtsyna I.E.
Vol 17, No 1 (2021) Calculated assessment of the impact of geometric deviations from the design on the parameters of mechanical safety of building metal structures within the framework of scientific and technical support for construction PDF

(Rus)

Belostotsky A.M., Dmitriev D.S., Petryashev S.O., Nagibovich T.E.
Vol 16, No 5 (2020) I-shaped bent closed profiles with tubular shelves and calculation of the optimal layout of their composite sections PDF

(Rus)

Marutyan A.S.
Vol 16, No 2 (2020) Stress-strain state cylinder-plate-cable-stayed roof buildings (structures) with various forms of external support contour PDF

(Rus)

Kuzhakhmetova E.R.
Vol 16, No 5 (2020) Analytical assessment of the frequency of natural vibrations of a truss with an arbitrary number of panels PDF

(Rus)

Kirsanov M.N.
Vol 16, No 2 (2020) Stress state of metal dome meridional ribs at different stages of overhang erection process PDF

(Rus)

Lebed E.V., Vershinin V.P.
Vol 16, No 6 (2020) Influence of cover splices on the stress-strain state of plate-ribbed wood-composite panels PDF

(Rus)

Labudin B.V., Popov E.V., Oshchepkova E.S., Sopilov V.V., Ruslanova A.V., Fukalov A.A.
Vol 16, No 3 (2020) Calculation of building structures for several dynamic effects with a static accounting of higher forms of oscillation PDF

(Rus)

Lalin V.V., Le T.Q.
Vol 16, No 6 (2020) Influence of the height of the ribbed-ring dome on the stress state of its frame during the overhang mounting process PDF

(Rus)

Lebed E.V.
Vol 16, No 3 (2020) Calculation of the deflection of an arched truss with suspended elements depending on the number of panels PDF

(Rus)

Kirsanov M.N.
Vol 16, No 6 (2020) The software part, the fundamental and organizational structure of the software and hardware complex to ensure the safety of hydraulic and hydropower structures under the construction PDF

(Rus)

Antonov A.S.
Vol 16, No 3 (2020) Theory of the calculation of the reinforced concrete and inconsistency it to Eurocode PDF

(Rus)

Sanjarovskiy R.S., Sieber F., Ter-Emmanuilyan T.N., Manchenko M.M., Musabaev T.T., Gadzhiev M.A.
Vol 16, No 3 (2020) Damage analysis and assessment of the impact of damage on the operation of supporting structures of oil refining tube furnaces PDF

(Rus)

Golikov A.V., Subbotin D.I.
Vol 16, No 3 (2020) The trends and practical look of advanced steel frame structures PDF

(Eng)

Vatin N.I., Gebre T.H., Gebreslassie S.B.
Vol 16, No 1 (2020) Substantiation of the necessity and method of upgrading the software of the measuring complex for assessing the load capacity of girder spans of road bridges PDF

(Rus)

Salamakhin P.M., Lugovtsev E.A.
Vol 16, No 4 (2020) Modeling of random static loads on a structural cover with limited statistical data PDF

(Rus)

Solovev S.A.
Vol 16, No 1 (2020) The effectiveness of the implementation of pile foundations on the example of the reactor building of a nuclear power plant with VVER-1000 PDF

(Rus)

Sargsyan A.E., Gukova E.G.
Vol 16, No 4 (2020) Modeling of a piled foundation in a Femap with NX Nastran PDF

(Rus)

Kuzhakhmetova E.R.
Vol 16, No 1 (2020) Effect of joint stiffness and flexibility on the design of reinforced cement concrete structure PDF

(Eng)

Lamichhane G.P., Giri P.
Vol 16, No 5 (2020) Multitudes of Voigt - Reuss forks and Voigt - Christensen - Reuss tridents PDF

(Rus)

Erofeev V.T., Tyuryakhin A.S., Tyuryakhina T.P.
Vol 16, No 2 (2020) Probabilistic estimation seismic resistance of spatial steel frame under earthquake PDF

(Rus)

Mkrtychev O.V., Bulushev S.V.
Vol 15, No 1 (2019) A comparative study of beam design curves against lateral torsional buckling using AISC, EC and SP PDF

(Eng)

Galishnikova V.V., Gebre T.H.
Vol 15, No 4 (2019) Criteria of strength of walls from large masonry blocks PDF

(Rus)

Pyatikrestovsky K.P.
Vol 15, No 1 (2019) Curved closed profiles and calculation of their optimal parameters PDF

(Rus)

Marutyan A.S.
Vol 15, No 4 (2019) Changes in the stressed state of the framework of the metal ribbed-ring dome during the assembly process PDF

(Rus)

Lebed E.V.
Vol 15, No 1 (2019) Reliability analysis of geogrid material with random nonlinear viscoelastic characteristics PDF

(Rus)

Marasanov A.I.
Vol 15, No 5 (2019) Development of a method for calculating the stress state in horizontal sections of hydraulic engineering angular-type retaining walls PDF

(Rus)

Rubin O.D., Lisichkin S.E., Pashenko F.A.
Vol 15, No 2 (2019) Determining the width of the workpiece under bending conditions with stretching of the stamped part PDF

(Rus)

Morozov Y.A., Verkhov E.Y.
Vol 15, No 5 (2019) The concept of development of computer aided design programs for bridges or other engineering structures according to the specified criterion of optimality PDF

(Rus)

Salamakhin P.M., Chasovnikov A.D.
Vol 15, No 2 (2019) Determination of parameters of plastic deformation of elliptic membranes PDF

(Rus)

Galimov N.K., Yakupov S.N.
Vol 15, No 6 (2019) Effective modules of two-phase construction composites with grain filler PDF

(Rus)

Erofeev V.T., Tyuryahin A.S., Tyuryahina T.P., Tingaev A.V.
Vol 15, No 2 (2019) Development of the design module of the software and hardware complex to ensure the safety of mutually influencing HPS PDF

(Rus)

Rubin O.D., Antonov A.S., Bellendir E.N., Kobochkina E.M., Kotlov O.N.
Vol 15, No 6 (2019) Comparative calculation of optimal parameters of channel bent and bent closed profiles PDF

(Rus)

Marutyan A.S.
Vol 15, No 3 (2019) Method of full discretization in joint calculation in time of the system “construction - foundation - soil” PDF

(Eng)

Ter-Emmanuilyan T.N., Polumordvinov I.O.
Vol 15, No 6 (2019) Numerical studies of strength of concrete cylinders for compression PDF

(Rus)

Mkrtychev O.V., Andreev M.I.
Vol 15, No 3 (2019) Rationalization of the constructive form of towers with prestressed cables PDF

(Rus)

Sitnikov I.R., Golikov A.V.
Vol 15, No 3 (2019) The results of computer analysis of the wind load acting on the set of rolled profiles PDF

(Rus)

Veselev Y.A., Karabutov M.S.
Vol 15, No 4 (2019) Numerical analysis of mechanical safety parameters of Congress Hall building in Chelyabinsk PDF

(Rus)

Belostotsky A.M., Akimov P.A., Dmitriev D.S., Pavlov A.S., Dyadchenko Y.N., Nagibovich A.I.
Vol 15, No 1 (2019) System of insufficiency of the modern theory of long-term resistance of reinforced concrete and designers’ warnings PDF

(Mlt)

Sanzharovsky R.S., Manchenko M.M., Hadzhiev M.A., Musabaev T.T., Ter-Emmanuilyan T.N., Varenik K.A.
Vol 15, No 4 (2019) Theory of “dissolution” and “condensation” of the physical geometric characteristics of an arbitrary cross-section under the action of torsion with bending PDF

(Rus)

Kolchunov V.I., Demyanov A.I., Naumov N.V.
Vol 14, No 4 (2018) Stress-strain state investigation of the “YASUNI” shell by bionic architecture methods based on numerical modeling PDF

(Eng)

Alyoshina O.О., Cajamarca Zuniga D.
Vol 14, No 4 (2018) Adjustment of forces in large-span structures in the design of a rational constructive form of a Dolphinarium in Volgograd PDF

(Rus)

Sitnikov I.R., Golikov A.V.
Vol 14, No 4 (2018) Stress changing analysis in structures with account of the erection level PDF

(Rus)

Mkrtychev O.V., Andreev M.I., Sidorov D.S.
Vol 14, No 5 (2018) Insolvent ways of development of the modern theory of reinforced concrete PDF

(Eng)

Sanjarovsky R.S., Ter-Emmanuilyan T.N., Manchenko M.M.
Vol 14, No 2 (2018) Finding the extreme values of operating characteristics for quality control of construction products PDF

(Rus)

Chiganova N.M.
Vol 14, No 5 (2018) Accounting for the filling of the reservoir when calculating the stress-strain state of a concrete dam PDF

(Rus)

Baklykov I.V.
Vol 14, No 2 (2018) Superposition principle as the fundamental error of the creep theory and standards of the reinforced concrete PDF

(Rus)

Sanzharovsky R.S., Ter-Emmanuilyan T.N., Manchenko M.M.
Vol 14, No 6 (2018) Numerical simulation of the front of an air shock wave in a ground and air explosion in the software package LS-DYNA PDF

(Rus)

Mkrtychev O.V., Savenkov A.Y.
Vol 14, No 2 (2018) Analytical calculation of the deflection of a beam truss with double bracing PDF

(Rus)

Kirsanov M.N.
Vol 14, No 6 (2018) Application of plate mechanics to evaluate the effectiveness of reinforcing shot blasting PDF

(Rus)

Kolmogorov G.L., Vysotin A.S.
Vol 14, No 3 (2018) ANALYSIS OF THE EDGE EFFECT OF SHEAR STRESSES IN THE SHIFT OF A TWO-LAYER BEAM PDF

(Rus)

Andreev V.I., Tsybin N.Y., Turusov R.A.
Vol 14, No 6 (2018) Behavior of the frames of large-span metal domes in the process of their installation PDF

(Rus)

Lebed E.V.
Vol 14, No 3 (2018) DETERMINATION OF THE STRIPPING STRENGTH OF MONOLITHIC SLABS AND BEAMS PDF

(Rus)

Kuznetsov V.S., Shaposhnikova Y.A.
Vol 14, No 6 (2018) The development of chart based method for steel beam designs using the Russian sections PDF

(Eng)

Gebre T.H.
Vol 14, No 3 (2018) SECOND ORDER STRUCTURAL THEORY FOR THE STABILITY ANALYSIS OF COLUMNS PDF

(Eng)

Galishnikova V.V., Gebre T.H., Al-Sabri S.M., Saffia-Doe O.
Vol 14, No 4 (2018) Computer analysis of the behavior of large-span metal domes with different methods of installation PDF

(Rus)

Lebed E.V.
Vol 14, No 1 (2018) TRANSFORMATION ELEMENT BETWEEN THE DEPENDENCE OF THE FRAC- TURE MECHANICS AND THE EQUATIONS OF THE REINFORCED CONCRETE THEORY IN THE CONDITIONS OF A COMPLEX RESISTANCE PDF

(Rus)

DEM'YANOV A.I., YAKOVENKO I.A., KOLCHUNOV V.I.
Vol 14, No 1 (2018) STRESS STATE OF A CANTILEVER CABLE HOLDER OF THE TYPE CCH-3; 4; 6 PDF

(Rus)

FROLOV А.А., MOROZOV Y.А., VERKHOV E.Y.
Vol 14, No 1 (2018) INFLUENCE OF CONSTRUCTION OF TRANSPARENT COVERING ON EFFICIENCY OF CONCRETE HEAT TREATMENT IN SHUTTERING FORMS WITH USING SOLAR ENERGY PDF

(Rus)

KOROTEEV D.D., KHARUN M.
1 - 84 of 84 Items

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies