<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE root>
<article xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ali="http://www.niso.org/schemas/ali/1.0/" article-type="research-article" dtd-version="1.2" xml:lang="en"><front><journal-meta><journal-id journal-id-type="publisher-id">Structural Mechanics of Engineering Constructions and Buildings</journal-id><journal-title-group><journal-title xml:lang="en">Structural Mechanics of Engineering Constructions and Buildings</journal-title><trans-title-group xml:lang="ru"><trans-title>Строительная механика инженерных конструкций и сооружений</trans-title></trans-title-group></journal-title-group><issn publication-format="print">1815-5235</issn><issn publication-format="electronic">2587-8700</issn><publisher><publisher-name xml:lang="en">Peoples’ Friendship University of Russia named after Patrice Lumumba (RUDN University)</publisher-name></publisher></journal-meta><article-meta><article-id pub-id-type="publisher-id">46939</article-id><article-id pub-id-type="doi">10.22363/1815-5235-2025-21-4-358-373</article-id><article-id pub-id-type="edn">CLHGBZ</article-id><article-categories><subj-group subj-group-type="toc-heading" xml:lang="en"><subject>Construction materials and products</subject></subj-group><subj-group subj-group-type="toc-heading" xml:lang="ru"><subject>Строительные материалы и изделия</subject></subj-group><subj-group subj-group-type="article-type"><subject>Research Article</subject></subj-group></article-categories><title-group><article-title xml:lang="en">Determination of Key Quality Indicators of Multilayer Building Structures</article-title><trans-title-group xml:lang="ru"><trans-title>Определение основных показателей качества многослойных строительных конструкций</trans-title></trans-title-group></title-group><contrib-group><contrib contrib-type="author"><contrib-id contrib-id-type="orcid">https://orcid.org/0000-0003-4880-887X</contrib-id><contrib-id contrib-id-type="spin">6036-8067</contrib-id><name-alternatives><name xml:lang="en"><surname>Morozova</surname><given-names>Yulianna A.</given-names></name><name xml:lang="ru"><surname>Морозова</surname><given-names>Юлианна Андреевна</given-names></name></name-alternatives><bio xml:lang="en"><p>Postgraduate student at the Department of Construction Technologies and Structural Materials, Academy of Engineering</p></bio><bio xml:lang="ru"><p>аспирант кафедры технологий строительства и конструкционных материалов, инженерная академия</p></bio><email>juliaandreeva99@mail.ru</email><xref ref-type="aff" rid="aff1"/></contrib><contrib contrib-type="author"><contrib-id contrib-id-type="orcid">https://orcid.org/0000-0002-8143-4614</contrib-id><contrib-id contrib-id-type="spin">8731-8713</contrib-id><name-alternatives><name xml:lang="en"><surname>Okolnikova</surname><given-names>Galina E.</given-names></name><name xml:lang="ru"><surname>Окольникова</surname><given-names>Галина Эриковна</given-names></name></name-alternatives><bio xml:lang="en"><p>Candidate of Tehcnical Sciences, Associate Professor, Department Construction Technologies and Structural Materials, Academy of Engineering, RUDN University; Professor, Department of Reinforced Concrete and Masonry Structures, Moscow State University of Civil Engineering</p></bio><bio xml:lang="ru"><p>кандидат технических наук, доцент кафедры технологий строительства и конструкционных материалов, инженерная академия, Российский университет дружбы народов; доцент кафедры железобетонных и каменных конструкций, Национальный исследовательский Московский государственный строительный университет</p></bio><email>okolnikova_ge@mail.ru</email><xref ref-type="aff" rid="aff1"/><xref ref-type="aff" rid="aff2"/></contrib><contrib contrib-type="author"><contrib-id contrib-id-type="orcid">https://orcid.org/0000-0002-5078-7302</contrib-id><contrib-id contrib-id-type="spin">9458-7341</contrib-id><name-alternatives><name xml:lang="en"><surname>Morozov</surname><given-names>Andrey A.</given-names></name><name xml:lang="ru"><surname>Морозов</surname><given-names>Андрей Андреевич</given-names></name></name-alternatives><bio xml:lang="en"><p>Postgraduate student at the Department of Construction</p></bio><bio xml:lang="ru"><p>аспирант кафедры строительства</p></bio><email>morozov99aa@gmail.com</email><xref ref-type="aff" rid="aff3"/></contrib><contrib contrib-type="author"><contrib-id contrib-id-type="orcid">https://orcid.org/0000-0002-6597-8558</contrib-id><contrib-id contrib-id-type="spin">8596-1485</contrib-id><name-alternatives><name xml:lang="en"><surname>Pritykin</surname><given-names>Alexey I.</given-names></name><name xml:lang="ru"><surname>Притыкин</surname><given-names>Алексей Игоревич</given-names></name></name-alternatives><bio xml:lang="en"><p>Doctor of Technical Sciences, Professor, Department of Construction, Kaliningrad State Technical University; Professor, Educational scientific cluster «Institute of High Technologies», Immanuel Kant Baltic Federal University</p></bio><bio xml:lang="ru"><p>доктор технических наук, профессор кафедры строительства, Калининградский государственный технический университет; профессор образовательного научного кластера Института высоких технологий, Балтийский федеральный университет им. Иммануила Канта</p></bio><email>prit_alex@mail.ru</email><xref ref-type="aff" rid="aff3"/><xref ref-type="aff" rid="aff4"/></contrib><contrib contrib-type="author"><contrib-id contrib-id-type="orcid">https://orcid.org/0000-0002-7839-7381</contrib-id><contrib-id contrib-id-type="spin">6065-1733</contrib-id><name-alternatives><name xml:lang="en"><surname>Yazyev</surname><given-names>Serdar B.</given-names></name><name xml:lang="ru"><surname>Языев</surname><given-names>Сердар Батырович</given-names></name></name-alternatives><bio xml:lang="en"><p>Doctor of Technical Sciences, Head of the Department Construction Technologies and Structural Materials, Academy of Engineering</p></bio><bio xml:lang="ru"><p>доктор технических наук, заведующий кафедрой технологий строительства и конструкционных материалов, инженерная академия</p></bio><email>yazyev_sb@pfur.ru</email><xref ref-type="aff" rid="aff1"/></contrib></contrib-group><aff-alternatives id="aff1"><aff><institution xml:lang="en">RUDN University</institution></aff><aff><institution xml:lang="ru">Российский университет дружбы народов</institution></aff></aff-alternatives><aff-alternatives id="aff2"><aff><institution xml:lang="en">Moscow State University of Civil Engineering (National Research University)</institution></aff><aff><institution xml:lang="ru">Национальный исследовательский Московский государственный строительный университет</institution></aff></aff-alternatives><aff-alternatives id="aff3"><aff><institution xml:lang="en">Kaliningrad State Technical University</institution></aff><aff><institution xml:lang="ru">Калининградский государственный технический университет</institution></aff></aff-alternatives><aff-alternatives id="aff4"><aff><institution xml:lang="en">Immanuel Kant Baltic Federal University</institution></aff><aff><institution xml:lang="ru">Балтийский федеральный университет им. Иммануила Канта</institution></aff></aff-alternatives><pub-date date-type="pub" iso-8601-date="2025-11-05" publication-format="electronic"><day>05</day><month>11</month><year>2025</year></pub-date><volume>21</volume><issue>4</issue><issue-title xml:lang="en">VOL 21, NO4 (2025)</issue-title><issue-title xml:lang="ru">ТОМ 21, №4 (2025)</issue-title><fpage>358</fpage><lpage>373</lpage><history><date date-type="received" iso-8601-date="2025-11-05"><day>05</day><month>11</month><year>2025</year></date></history><permissions><copyright-statement xml:lang="en">Copyright ©; 2025, Morozova Y.A., Okolnikova G.E., Morozov A.A., Pritykin A.I., Yazyev S.B.</copyright-statement><copyright-statement xml:lang="ru">Copyright ©; 2025, Морозова Ю.А., Окольникова Г.Э., Морозов А.А., Притыкин А.И., Языев С.Б.</copyright-statement><copyright-year>2025</copyright-year><copyright-holder xml:lang="en">Morozova Y.A., Okolnikova G.E., Morozov A.A., Pritykin A.I., Yazyev S.B.</copyright-holder><copyright-holder xml:lang="ru">Морозова Ю.А., Окольникова Г.Э., Морозов А.А., Притыкин А.И., Языев С.Б.</copyright-holder><ali:free_to_read xmlns:ali="http://www.niso.org/schemas/ali/1.0/"/><license><ali:license_ref xmlns:ali="http://www.niso.org/schemas/ali/1.0/">https://creativecommons.org/licenses/by-nc/4.0</ali:license_ref></license></permissions><self-uri xlink:href="https://journals.rudn.ru/structural-mechanics/article/view/46939">https://journals.rudn.ru/structural-mechanics/article/view/46939</self-uri><abstract xml:lang="en"><p>The development of layered structures represents a viable and promising avenue in the field of construction, as their utilization has the potential to significantly enhance strength characteristics, resistance against external forces, as well as enhance the thermal and acoustic insulation properties of buildings and structures. The aim of this study is to investigate the diversity and benefits of utilizing multilayer building components as an alternative to conventional structures, as well as to analyze the characteristics of their operation. Based on the findings of the study, it can be inferred that multilayered structures offer enhanced thermal and acoustic insulation characteristics, which contribute to the creation of a more comfortable living and working environment. Additionally, these structures can significantly decrease the weight of buildings, leading to potential savings in foundation and other structural components.</p></abstract><trans-abstract xml:lang="ru"><p>Разработка слоистых конструкций - перспективное направление в области строительства. Использование данного типа конструкций имеет потенциал для значительного повышения прочностных характеристик, устойчивости к внешним силовым воздействиям, а также улучшения тепло- и звукоизоляционных свойств зданий и сооружений. Цель работы - исследование разнообразия и преимуществ применения многослойных строительных элементов в качестве альтернативы традиционным конструкциям, а также анализ особенностей их функционирования. На основании полученных результатов исследования можно сделать вывод, что многослойные конструкции обладают улучшенными тепло- и звукоизоляционными характеристиками, что способствует созданию более комфортной среды для эксплуатации. Кроме того, эти конструкции могут значительно снизить вес зданий, что приводит к потенциальной экономии на фундаменте и других конструктивных компонентах.</p></trans-abstract><kwd-group xml:lang="en"><kwd>multilayer structures</kwd><kwd>rubber-based concrete</kwd><kwd>additive technologies</kwd><kwd>corrugated structures</kwd><kwd>wall systems</kwd></kwd-group><kwd-group xml:lang="ru"><kwd>многослойные конструкции</kwd><kwd>бетон на основе каучука</kwd><kwd>каутоны</kwd><kwd>аддитивные технологии</kwd><kwd>гофрированные конструкции</kwd><kwd>стеновые системы</kwd></kwd-group><funding-group/></article-meta><fn-group/></front><body></body><back><ref-list><ref id="B1"><label>1.</label><citation-alternatives><mixed-citation xml:lang="en">Annamuradova A., Bayramdurdyev A., Nazarov A.T. Use of lightweight and durable composite materials in construction. Science Bulletin. 2024;3(6):1658-1661. (In Russ.) EDN: FZCOMU</mixed-citation><mixed-citation xml:lang="ru">Аннамырадова А., Байрамдурдыев А., Назаров А. Использование легких и прочных композитных материалов в строительстве // Вестник науки. 2024. Т. 3. № 6. С. 1658–1661. EDN: FZCOMU</mixed-citation></citation-alternatives></ref><ref id="B2"><label>2.</label><citation-alternatives><mixed-citation xml:lang="en">Jonnala S.N., Gogoi D., Devi S., Kumar M., Kumar C.H. A comprehensive study of building materials and bricks for residential construction. Construction and Building Materials. 2024;425:135931. https://doi.org/10.1016/j.conbuildmat.2024.135931 EDN: NSLDOL</mixed-citation><mixed-citation xml:lang="ru">Jonnala S.N., Gogoi D., Devi S., Kumar M., Kumar C.H. A comprehensive study of building materials and bricks for residential construction // Construction and Building Materials. 2024. Vol. 425. Article no. 135931. https://doi.org/10.1016/j.conbuildmat.2024.135931 EDN: NSLDOL</mixed-citation></citation-alternatives></ref><ref id="B3"><label>3.</label><citation-alternatives><mixed-citation xml:lang="en">Mugahed Amran Y.H., Alyousef R., Alabduljabbar H., Rashid R.S.M., Hung C.C. Properties and applications of FRP in strengthening RC structures: A review. Structures. 2018;16:208-238. https://doi.org/10.1016/j.istruc.2018.09.008 EDN: MOLRME</mixed-citation><mixed-citation xml:lang="ru">Mugahed Amran Y.H., Alyousef R., Alabduljabbar H., Rashid R.S.M., Hung C.C. Properties and applications of FRP in strengthening RC structures: A review // Structures. 2018. Vol. 16. P. 208–238. https://doi.org/10.1016/j.istruc.2018.09.008 EDN: MOLRME</mixed-citation></citation-alternatives></ref><ref id="B4"><label>4.</label><citation-alternatives><mixed-citation xml:lang="en">Nasr Y., El Zakhem H., Hamami A.E.A., El Bachawati M., Belarbi R. Comprehensive review of innovative materials for sustainable buildings’ energy performance. Energies. 2023;16(21):7440. https://doi.org/10.3390/en16217440 EDN: CYCYPO</mixed-citation><mixed-citation xml:lang="ru">Nasr Y., El Zakhem H., Hamami A.E.A., El Bachawati M., Belarbi R. Comprehensive review of innovative materials for sustainable building’ energy performance // Energies. 2023. Vol. 16. No. 21. Article no. 7440. https://doi.org/10.3390/ en16217440 EDN: CYCYPO</mixed-citation></citation-alternatives></ref><ref id="B5"><label>5.</label><citation-alternatives><mixed-citation xml:lang="en">Elfaleh I., Abbassi F., Habibi M., Ahmad F., Guedri M., Nasri M., Garnier Ch. A comprehensive review of natural fibers and their composites: An eco-friendly alternative to conventional materials. Results in Engineering. 2023;19:101271. https://doi.org/10.1016/j.rineng.2023.101271 EDN: GNJFKH</mixed-citation><mixed-citation xml:lang="ru">Elfaleh I., Abbassi F., Habibi M., Ahmad F., Guedri M., Nasri M., Garnier Ch. A comprehensive review of natural fibers and their composites: An eco-friendly alternative to conventional materials // Results in Engineering. 2023. Vol. 19. Article no. 101271. https://doi.org/10.1016/j.rineng.2023.101271 EDN: GNJFKH</mixed-citation></citation-alternatives></ref><ref id="B6"><label>6.</label><citation-alternatives><mixed-citation xml:lang="en">Voutetaki M.E., Mpalaskas A.C. Natural fiber-reinforced mycelium composite for innovative and sustainable construction materials. Fibers. 2024;12(7):57. https://doi.org/10.3390/fib12070057 EDN: DAEEHJ</mixed-citation><mixed-citation xml:lang="ru">Voutetaki M.E., Mpalaskas A.C. Natural Fiber-Reinforced Mycelium composite for innovative and sustainable construction materials // Fibers. 2024. Vol. 12. No. 7. Article no. 57. https://doi.org/10.3390/fib12070057 EDN: DAEEHJ</mixed-citation></citation-alternatives></ref><ref id="B7"><label>7.</label><citation-alternatives><mixed-citation xml:lang="en">Kudryashov V.A., Drobysh A.S. Features of application of polymer composite materials and structures in construction. Journal of Civil Protection. 2024;8(4):398-410. (In Russ.) https://doi.org/10.33408/2519-237X.2024.8-4.398 EDN: FEUIRY</mixed-citation><mixed-citation xml:lang="ru">Кудряшов В.А., Дробыш А.С. Особенности применения полимерных композитных материалов и конструкций в строительстве // Вестник Университета гражданской защиты МЧС Беларуси. 2024. Т. 8. № 4. C. 398–410. https://doi.org/10.33408/2519-237X.2024.8-4.398 EDN: FEUIRY</mixed-citation></citation-alternatives></ref><ref id="B8"><label>8.</label><citation-alternatives><mixed-citation xml:lang="en">Rubino F., Nisticò A., Tucci F., Carlone P. Marine application of fiber reinforced composites: A review. Journal of Marine Science and Engineering. 2020;8(1);26. https://doi.org/10.3390/jmse8010026 EDN: ZMHSGA</mixed-citation><mixed-citation xml:lang="ru">Rubino F., Nisticò A., Tucci F., Carlone P. Marine application of fiber reinforced composites: A review // Journal of Marine Science and Engineering. 2020. Vol. 8. No. 1. Article no. 26. https://doi.org/10.3390/jmse8010026 EDN: ZMHSGA</mixed-citation></citation-alternatives></ref><ref id="B9"><label>9.</label><citation-alternatives><mixed-citation xml:lang="en">Friedrich K., Almajid A.A. Manufacturing aspects of advanced polymer composites for automotive applications. Applied Composite Materials. 2013;20(2):107-128. https://doi.org/10.1007/s10443-012-9258-7 EDN LKCXQX</mixed-citation><mixed-citation xml:lang="ru">Friedrich K., Almajid A.A. Manufacturing aspects of advanced polymer composites for automotive applications // Applied Composite Materials. 2013. Vol. 20. No. 2. P. 107–128. https://doi.org/10.1007/s10443-012-9258-7 EDN: LKCXQX</mixed-citation></citation-alternatives></ref><ref id="B10"><label>10.</label><citation-alternatives><mixed-citation xml:lang="en">Chen N.Z., Sun H.H., Soares C.G. Reliability analysis of a ship hull in composite material. Composite Structures. 2003;62(1):59-66. https://doi.org/10.1016/S0263-8223(03)00084-9 EDN: KJLVAI</mixed-citation><mixed-citation xml:lang="ru">Chen N.Z., Sun H.H., Soares C.G. Reliability analysis of a ship hull in composite material // Composite Structures. 2003. Vol. 62. No. 1. P. 59–66. https://doi.org/10.1016/S0263-8223(03)00084-9 EDN: KJLVAI</mixed-citation></citation-alternatives></ref><ref id="B11"><label>11.</label><citation-alternatives><mixed-citation xml:lang="en">Shorstov R., Suleymanova L., Kara K. Technology of obtaining multilayer structures variational structure. Bulletin of BSTU Named After V.G. Shukhov. 2019;4:32-39. (In Russ.) https://doi.org/10.34031/article_5cb1e65fe51130.63177531 EDN: ZDDGGD</mixed-citation><mixed-citation xml:lang="ru">Шорстов Р.А., Сулейманова Л.А., Кара К. Технологии получения многослойных конструкций вариатропной структуры // Вестник Белгородского государственного технологического университета им. В.Г. Шухова. 2019. № 4. С. 32–39. https://doi.org/10.34031/article_5cb1e65fe51130.63177531 EDN: ZDDGGD</mixed-citation></citation-alternatives></ref><ref id="B12"><label>12.</label><citation-alternatives><mixed-citation xml:lang="en">Zaborova D., Musorina T., Petrichenko M. Thermal stability and thermal resistance of a multilayer wall construction: assessment of parameters. St. Petersburg Polytechnic University Journal: Physics and Mathematics. 2017;23(1):18-26. (In Russ.) https://doi.org/10.18721/JEST.230102 EDN: WAKRSO</mixed-citation><mixed-citation xml:lang="ru">Заборова Д.Д., Мусорина Т.А., Петриченко М.Р. Теплотехническая работоспособность многослойной стеновой конструкции // Научно-технические ведомости Санкт-Петербургского государственного политехнического университета. 2017. Т. 23. № 1. С. 18–26. https://doi.org/10.18721/JEST.230102 EDN: WAKRSO</mixed-citation></citation-alternatives></ref><ref id="B13"><label>13.</label><citation-alternatives><mixed-citation xml:lang="en">Tudose I.V., Mouratis K., Ionescu O.N., Romanitan C., Pachiu C., Tutunaru-Brincoveanu O., Suchea M.P., Koudoumas E. Comparative study of graphene nanoplatelets and multiwall carbon nanotubes-polypropylene composite materials for electromagnetic shielding. Nanomaterials. 2022;12(14):2411. https://doi.org/10.3390/nano12142411 EDN: QFCLKJ</mixed-citation><mixed-citation xml:lang="ru">Tudose I.V., Mouratis K., Ionescu O.N., Romanitan C., Pachiu C., Tutunaru-Brincoveanu O., Suchea M.P., Koudoumas E. Comparative study of graphene nanoplatelets and multiwall carbon nanotubes-polypropylene composite materials for electromagnetic shielding // Nanomaterials. 2022. Vol. 12. No. 14. Article no. 2411. https://doi.org/10.3390/nano 12142411 EDN: QFCLKJ</mixed-citation></citation-alternatives></ref><ref id="B14"><label>14.</label><citation-alternatives><mixed-citation xml:lang="en">Vasilyeva E.Yu. Innovative materials and technologies in housing construction: Importance and prospects. Vestnik MGSU [Monthly Journal on Construction and Architecture]. 2022;17(11):1586-1593. (In Russ.) https://doi.org/10.22227/1997-0935.2022.11.1586-1593</mixed-citation><mixed-citation xml:lang="ru">Васильева Е.Ю. Значение и перспективы применения инновационных материалов и технологий в жилищном строительстве // Вестник МГСУ. 2022. Т. 1. № 11. С. 1586–1593. https://doi.org/10.22227/1997-0935.2022.11.1586-1593 EDN: CJCLIZ</mixed-citation></citation-alternatives></ref><ref id="B15"><label>15.</label><citation-alternatives><mixed-citation xml:lang="en">Odintsov M.A., Davydova S.O., Pavlova S.A. Investigation of maintainability of fiberglass and carbon fiber plastics during tensile testing. Proceedings of Young Scientists and Specialists of Samara University. 2022;2(21):27-32. EDN: HEREMK</mixed-citation><mixed-citation xml:lang="ru">Odintsov M.A., Davydova S.O., Pavlova S.A. Investigation of maintainability of fiberglass and carbon fiber plastics during tensile testing // Proceedings of Young Scientists and Specialists of Samara University. 2022. No. 2 (21). P. 27–32. EDN: HEREMK</mixed-citation></citation-alternatives></ref><ref id="B16"><label>16.</label><citation-alternatives><mixed-citation xml:lang="en">Ivanova M.S., Korobchuk M.V. The application of polymer composites in residential buildings. Modern Construction and Architecture. 2023;5(36):2. (In Russ.) https://doi.org/10.18454/mca.2023.36.2 EDN: MTCBUJ</mixed-citation><mixed-citation xml:lang="ru">Иванова М.С., Коробчук М.В. Применение полимерных композиционных материалов в объектах жилищного строительства // Современное строительство и архитектура. 2023. № 5 (36). С. 2. https://doi.org/10.18454/mca.2023.36.2 EDN: MTCBUJ</mixed-citation></citation-alternatives></ref><ref id="B17"><label>17.</label><citation-alternatives><mixed-citation xml:lang="en">Bakholdin D.G. Application of composite materials in construction. International Journal of Humanities and Natural Sciences. 2024;5-1(92):189-192. (In Russ.) https://doi.org/10.24412/2500-1000-2024-5-1-189-192 EDN: AVSWVS</mixed-citation><mixed-citation xml:lang="ru">Бахолдин Д.Г. Применение композитных материалов в строительстве // Международный журнал гуманитарных и естественных наук. 2024. Вып. 5–1 (92). С. 189–192. https://doi.org/10.24412/2500-1000-2024-5-1-189-192</mixed-citation></citation-alternatives></ref><ref id="B18"><label>18.</label><citation-alternatives><mixed-citation xml:lang="en">Meleshin M.A., Salameh A., Alsaid M. Experience in application of composite materials in shipbuilding. Vestnik of Astrakhan State Technical University. Series: Marine Engineering and Technologies. 2022;(2):44-50. (In Russ.) https://doi.org/10.24143/2073-1574-2022-2-44-50 EDN: UXSRLV</mixed-citation><mixed-citation xml:lang="ru">Мелешин М.А., Саламех А., Алсаид М. Опыт применения композитных материалов в судостроении // Вестник Астраханского государственного технического университета. Серия: Морская техника и технология. 2022. № 2. С. 44–50. https://doi.org/10.24143/2073-1574-2022-2-44-50</mixed-citation></citation-alternatives></ref><ref id="B19"><label>19.</label><citation-alternatives><mixed-citation xml:lang="en">Kokoreva K.A., Belyaev N.D. Effectiveness of using composite materials in bridge construction. Interdisciplinarity in Theory and Practice. 2015;(7):153-158. EDN: UKTIGV</mixed-citation><mixed-citation xml:lang="ru">Kokoreva K.A. Belyaev N.D. Effectiveness of using composite materials in bridge construction // Interdisciplinarity in Theory and Practice. 2015. No. 7. P. 153–158. EDN: UKTIGV</mixed-citation></citation-alternatives></ref><ref id="B20"><label>20.</label><citation-alternatives><mixed-citation xml:lang="en">Morozova Y.A., Okolnikova G.E. The quality control of concrete structures reinforced with external composite reinforcement. Bulletin of SUSU. Series: Construction Engineering and Architecture. 2024;24(3):15-23. (In Russ.) https://doi.org/10.14529/build240302 EDN: KAAMGK</mixed-citation><mixed-citation xml:lang="ru">Морозова Ю.А., Окольникова Г.Э. Методы контроля качества усиления железобетонных конструкций системами внешнего армирования из композитных материалов // Вестник Южно-Уральского государственного университета. Серия: Строительство и архитектура. 2024. Т. 24. № 3. С. 15–23. https://doi.org/10.14529/build240302 EDN: KAAMGK</mixed-citation></citation-alternatives></ref><ref id="B21"><label>21.</label><citation-alternatives><mixed-citation xml:lang="en">Shirtanov A.A. The potential of composite materials market in the RU. Science Bulletin. 2023;3(11):189-194. (In Russ.) EDN: JMIEON</mixed-citation><mixed-citation xml:lang="ru">Ширтанов А.А. Потенциал рынка композитных материалов в Российской Федерации // Вестник науки. 2023. Т. 3. № 11. С.189–194. EDN: JMIEON</mixed-citation></citation-alternatives></ref><ref id="B22"><label>22.</label><citation-alternatives><mixed-citation xml:lang="en">Guamán-Rivera R., Martínez-Rocamora A., García-Alvarado R., Muñoz-Sanguinetti C., González-Böhme L.F., Auat-Cheein F. Recent developments and challenges of 3D-printed construction: A review of research fronts. Buildings. 2022;12(2):229. https://doi.org/10.3390/buildings12020229 EDN: XWXSEY</mixed-citation><mixed-citation xml:lang="ru">Guamán-Rivera R., Martínez-Rocamora A., García-Alvarado R., Muñoz-Sanguinetti C., González-Böhme L.F., Auat-Cheein F. Recent developments and challenges of 3D-printed construction: A review of research fronts // Buildings. 2022. Vol. 12. No. 2. Article no. 229. https://doi.org/10.3390/buildings12020229 EDN: XWXSEY</mixed-citation></citation-alternatives></ref><ref id="B23"><label>23.</label><citation-alternatives><mixed-citation xml:lang="en">Tsarenko A.A., Shaburova N.A. The possibility of using construction 3D printing with concrete in the construction of buildings and structures in Russia. Construction Economics. 2024;(4):389-392. (In Russ.) https://doi.org/10.24412/0131-7768-2024-4-389-392 EDN: GALAVA</mixed-citation><mixed-citation xml:lang="ru">Царенко А.А., Шапурова Н.А. Возможность использования строительной 3D-печати бетоном при возведении зданий и сооружений в России // Экономика строительства. 2024. № 4. С. 389–392 https://doi.org/10.24412/0131-7768-2024-4-389-392 EDN: GALAVA</mixed-citation></citation-alternatives></ref><ref id="B24"><label>24.</label><citation-alternatives><mixed-citation xml:lang="en">Krotov O.M., Ptukhina I.S. Evaluation of the effectiveness of 3D printing for wall structures. Construction Economics. 2023;(5):73-79. (In Russ.) EDN: UOCGBF</mixed-citation><mixed-citation xml:lang="ru">Кротов О.М., Птухина И.С. Оценка эффективности применения 3D-печати для стеновых конструкций // Экономика строительства. 2023. № 5. С. 73–79. EDN: UOCGBF</mixed-citation></citation-alternatives></ref><ref id="B25"><label>25.</label><citation-alternatives><mixed-citation xml:lang="en">El-Sayegh S., Romdhane L., Manjikian S. A critical review of 3D printing in construction: benefits, challenges, and risks. Archives of Civil and Mechanical Engineering. 2020;20(2):1-25. https://doi.org/10.1007/s43452-020-00038-w EDN: ASRTBA</mixed-citation><mixed-citation xml:lang="ru">El-Sayegh S., Romdhane L., Manjikian S. A critical review of 3D printing in construction: benefits, challenges, and risks // Archives of Civil and Mechanical Engineering. 2020. Vol. 20. No. 2. P. 1–25. https://doi.org/10.1007/s43452-020-00038-w EDN: ASRTBA</mixed-citation></citation-alternatives></ref><ref id="B26"><label>26.</label><citation-alternatives><mixed-citation xml:lang="en">Abdalla H., Fattah K.P., Abdallah M., Tamimi A.K. Environmental footprint and economics of a full-scale 3D-printed house. Sustainability. 2021;13(21):11978. https://doi.org/10.3390/su132111978 EDN ZNMUFP</mixed-citation><mixed-citation xml:lang="ru">Abdalla H., Fattah K.P., Abdallah M., Tamimi A.K. Environmental Footprint and Economics of a Full-Scale 3D-Printed House // Sustainability. 2021. Vol. 13. No. 21. Article no. 11978. https://doi.org/10.3390/su132111978 EDN: ZNMUFP</mixed-citation></citation-alternatives></ref><ref id="B27"><label>27.</label><citation-alternatives><mixed-citation xml:lang="en">Al-Tamimi A.K., Alqamish H.H., Khaldoune A., Alhaidary H., Shirvanimoghaddam K. Framework of 3D concrete printing potential and challenges. Buildings. 2023;13(3):827. https://doi.org/10.3390/buildings13030827 EDN: INCTIS</mixed-citation><mixed-citation xml:lang="ru">Al-Tamimi A.K., Alqamish H.H., Khaldoune A., Alhaidary H., Shirvanimoghaddam K. Framework of 3D Concrete Printing Potential and Challenges // Buildings. 2023. Vol. 13. No. 3. Article no. 827. https://doi.org/10.3390/buildings13030827 EDN: INCTIS</mixed-citation></citation-alternatives></ref><ref id="B28"><label>28.</label><citation-alternatives><mixed-citation xml:lang="en">Wolf A., Rosendahl Ph.L., Knaack U. Additive manufacturing of clay and ceramic building components. Automation in Construction. 2022;133:103956. https://doi.org/10.1016/j.autcon.2021.103956 EDN: KROOVS</mixed-citation><mixed-citation xml:lang="ru">Wolf A., Rosendahl Ph.L., Knaack U. Additive manufacturing of clay and ceramic building components // Automation in Construction. 2022. Vol. 133. Article no. 103956. https://doi.org/10.1016/j.autcon.2021.103956 EDN: KROOVS</mixed-citation></citation-alternatives></ref><ref id="B29"><label>29.</label><citation-alternatives><mixed-citation xml:lang="en">Figovsky O.L., Potapov Y.B., Polikutin A.E., Nguyen Z.F. Strength of normal sections of two- layer rubcon-concrete bending elements of building structures. Eastern-European Journal of Enterprise Technologies. 2014;11(72):14-20. (In Russ.) https://doi.org/10.15587/1729-4061.2014.30120 EDN: TCSMSZ</mixed-citation><mixed-citation xml:lang="ru">Фиговский О.Л., Потапов Ю.Б., Поликутин А.Э., Нгуен З.Ф. Прочность нормальных сечений двухслойных каутоно-бетонных изгибаемых элементов строительных конструкций // Восточно-Европейский журнал передовых технологий. 2014. № 11 (72). С. 14–20. https://doi.org/10.15587/1729-4061.2014.30120 EDN: TCSMSZ</mixed-citation></citation-alternatives></ref><ref id="B30"><label>30.</label><citation-alternatives><mixed-citation xml:lang="en">Popov I., Levchenko A. Experimental investigation of internal friction in rubber concrete and fiber-reinforced rubber concrete. Russian Journal of Building Construction and Architecture. 2021;4:53-62. https://doi.org/10.36622/VSTU.2021.52.4.005 EDN: JINMHO</mixed-citation><mixed-citation xml:lang="ru">Попов И.И., Левченко А.В. Экспериментальное исследование внутреннего трения в каутоне и фиброкаутоне // Научный журнал строительства и архитектуры. 2021. № 4 (64). С. 83–92. https://doi.org/10.36622/VSTU.2021.64.4.008 EDN: QHDDED</mixed-citation></citation-alternatives></ref><ref id="B31"><label>31.</label><citation-alternatives><mixed-citation xml:lang="en">Polikutin A.E., Potapov Yu.B., Levchenko A., Perekalsky O. The stress-strain foreign state of normal sections of rubkon bends elements with mixed reinforcement. International scientific conference on energy management of municipal facilities and Sustainable Energy technologies EMMFT 2018 : Series: achievements in intelligent systems and computing. Voronezh and Samara, Russia, December 10-13, 2018. Vol. 2. Cham: Springer, 2019;983:586-599. https://doi.org/10.1007/978-3-030-19868-8_56 EDN RWARUH</mixed-citation><mixed-citation xml:lang="ru">Polikutin A.E., Potapov Yu.B., Levchenko A., Perekal’skiy O. The stress-strain state of normal sections rubcon bending elements with mixed reinforcement // International Scientific Conference Energy Management of Municipal Facilities and Sustainable Energy Technologies EMMFT 2018 : Серия: Advances in Intelligent Systems and Computing Voronezh and Samara, Russia, 10–13 декабря 2018 года. Vol. 2. Cham: Springer, 2019. Vol. 983. P. 586–599. https://doi.org/10.1007/978-3-030-19868-8_56 EDN: RWARUH</mixed-citation></citation-alternatives></ref><ref id="B32"><label>32.</label><citation-alternatives><mixed-citation xml:lang="en">Kovalchuk V., Onyshchenko A., Sysyn M., Hnativ Y., Tiutkin O., Koval M., Parneta M. Restoration of the bearing capacity of damaged transport constructions made of corrugated metal structures. The Baltic Journal of Road and Bridge Engineering. 2021;16(2):90-109. https://doi.org/10.7250/bjrbe.2021-16.529 EDN NGTPIH</mixed-citation><mixed-citation xml:lang="ru">Kovalchuk V., Onyshchenko A., Sysyn M., Hnativ Y., Tiutkin O., Koval M., Parneta M. Restoration of the bearing capacity of damaged transport constructions made of corrugated metal structures // The Baltic Journal of Road and Bridge Engineering. 2021. Vol. 16. No. 2. P. 90–109. https://doi.org/10.7250/bjrbe.2021-16.529 EDN: NGTPIH</mixed-citation></citation-alternatives></ref><ref id="B33"><label>33.</label><citation-alternatives><mixed-citation xml:lang="en">Kovalchuk V., Sysyn M., Movahedi Rad M., Fischer S. Investigation of the bearing capacity of transport constructions made of corrugated metal structures reinforced with transversal stiffening ribs. Infrastructures. 2023;8(9):131. https://doi.org/10.3390/infrastructures8090131 EDN UWUXSH</mixed-citation><mixed-citation xml:lang="ru">Kovalchuk V., Sysyn M., Movahedi Rad M., Fischer S. Investigation of the bearing capacity of transport constructions made of corrugated metal structures reinforced with transversal stiffening ribs // Infrastructures. 2023. Vol. 8. No. 9. Article no. 131. https://doi.org/10.3390/infrastructures8090131 EDN: UWUXSH</mixed-citation></citation-alternatives></ref><ref id="B34"><label>34.</label><citation-alternatives><mixed-citation xml:lang="en">Osterman E.D., Shutova O.A. Analysis of the types of constructions made of corrugated metal structures. Bulletin of PNRPU. Construction and architecture. 2016;7(1):18-29. (In Russ.) https://doi.org/10.15593/2224-9826/2016.1.03 EDN: VPZUTJ</mixed-citation><mixed-citation xml:lang="ru">Остерман Е.Д., Шутова О.А. Анализ типов сооружений из металлических гофрированных конструкций // Вестник ПНИПУ. Строительство и архитектура. 2016. Т. 7. № 1. С. 18–29. https://doi.org/10.15593/2224-9826/2016.1.03 EDN: VPZUTJ</mixed-citation></citation-alternatives></ref><ref id="B35"><label>35.</label><citation-alternatives><mixed-citation xml:lang="en">Brooks H., Lupeanu M., Piorkowski B. Research towards high speed extrusion freeforming. International Journal of Rapid Manufacturing. 2013;3:154-171. https://doi.org/10.1504/IJRAPIDM.2013.053686</mixed-citation><mixed-citation xml:lang="ru">Brooks H., Lupeanu M.E., Piorkowski B. Research towards high speed extrusion freeforming // International Journal of Rapid Manufacturing. 2013. Vol. 3. No. 2–3. Р. 154–171. https://doi.org/10.1504/IJRAPIDM.2013.053686</mixed-citation></citation-alternatives></ref><ref id="B36"><label>36.</label><citation-alternatives><mixed-citation xml:lang="en">Polikutin A., Konstantinov I., Nguyen Z., Truong Z. Strength analysis of oblique sections of two-layer rubber concrete flexural elements with varying relative shear span. Structural Mechanics and Structures. 2014;1(8):107-116. (In Russ.) EDN: SYRZTV</mixed-citation><mixed-citation xml:lang="ru">Поликутин А.Э., Константинов И.А., Нгуен З.Ф., Чыонг З.Х. Исследование прочности наклонных сечений двухслойных каутоно-бетонных изгибаемых элементов при изменении величины относительного пролета среза // Строительная механика и конструкции. 2014. № 1 (8). С. 107–116. EDN: SYRZTV</mixed-citation></citation-alternatives></ref><ref id="B37"><label>37.</label><citation-alternatives><mixed-citation xml:lang="en">Khaloo A., Darabad P.Y. Investigation of flexural capacity of concrete containing liquid silicone rubber. Shock and Vibration. 2021;2021(1):668283. https://doi.org/10.1155/2021/6668283 EDN: AZRGZQ</mixed-citation><mixed-citation xml:lang="ru">Khaloo A., Darabad P.Y. Investigation of flexural capacity of concrete containing liquid silicone rubber // Shock and Vibration. 2021. No. 2021. Article no. 6668283. https://doi.org/10.1155/2021/6668283</mixed-citation></citation-alternatives></ref><ref id="B38"><label>38.</label><citation-alternatives><mixed-citation xml:lang="en">Alasmari H.A., Abu Bakar B.H., Noaman A.T. A comparative study on the flexural behaviour of rubberized and hybrid rubberized reinforced concrete beams. Civil Engineering Journal. 2019;5(5):1052-1067. https://doi.org/10.28991/cej-2019-03091311</mixed-citation><mixed-citation xml:lang="ru">Alasmari H.A., Abu Bakar B.H., Noaman A.T. A comparative study on the flexural behaviour of rubberized and hybrid rubberized reinforced concrete beams // Civil Engineering Journal. 2019. Vol. 5. No. 5. P. 1052–1067. https://doi.org/10.28991/cej-2019-03091311</mixed-citation></citation-alternatives></ref><ref id="B39"><label>39.</label><citation-alternatives><mixed-citation xml:lang="en">Zaborova D. Advantages and special aspects of using corrugated beams in construction. Construction of Unique Buildings and Structures. 2014;7(22):36-53. (In Russ.) EDN: SKDYAJ</mixed-citation><mixed-citation xml:lang="ru">Заборова Д.Д., Дунаевская Ю.П. Преимущества и особенности применения гофро-балки в строительстве // Строительство уникальных зданий и сооружений. 2014. № 7 (22). С. 36–53. EDN: SKDYAJ</mixed-citation></citation-alternatives></ref><ref id="B40"><label>40.</label><citation-alternatives><mixed-citation xml:lang="en">Vahidimanesh B., Farrokhabadi A., Shahvari R., Gazor M., Mahdiabadi M. Experimental and numerical investigation of damage in multilayer sandwich panels with square and trapezoidal corrugated cores under quasi-static three-point bending. Engineering Structures. 2024;318:118715. https://doi.org/10.1016/j.engstruct.2024.118715 EDN: GBDYFM</mixed-citation><mixed-citation xml:lang="ru">Vahidimanesh B., Farrokhabadi A., Shahvari R., Gazor M., Mahdiabadi M. Experimental and numerical investigation of damage in multilayer sandwich panels with square and trapezoidal corrugated cores under quasi-static three-point bending // Engineering Structures. 2024. Vol. 318. Article no. 118715. https://doi.org/10.1016/j.engstruct.2024.118715</mixed-citation></citation-alternatives></ref><ref id="B41"><label>41.</label><citation-alternatives><mixed-citation xml:lang="en">Mathieson H., Fam A. Numerical modeling and experimental validation of axially loaded slender sandwich panels with soft core and various rib configurations. Engineering Structures. 2016;118:195-209. https://doi.org/10.1016/j.engstruct.2016.03.044</mixed-citation><mixed-citation xml:lang="ru">Mathieson H., Fam A. Numerical modeling and experimental validation of axially loaded slender sandwich panels with soft core and various rib configurations // Engineering Structures. 2016. Vol. 118. P. 195–209. https://doi.org/10.1016/j.engstruct.2016.03.044</mixed-citation></citation-alternatives></ref></ref-list></back></article>
