Structural Mechanics of Engineering Constructions and BuildingsStructural Mechanics of Engineering Constructions and BuildingsСтроительная механика инженерных конструкций и сооружений1815-52352587-8700Peoples’ Friendship University of Russia named after Patrice Lumumba (RUDN University)2707810.22363/1815-5235-2021-17-2-188-198Seismic resistenceСейсмостойкость сооруженийResearch ArticleSeismic retrofitting of buildings using Building Information ModelingСейсмическое переоснащение зданий с использованием информационного моделирования зданийhttps://orcid.org/0000-0002-9852-3576DerejeLami S.ДереджеЛами Силеши

master of the Department of Civil Engineering, Academy of Engineering of the RUDN University, assistant lecturer in the Department of Civil Engineering, Faculty of Engineering of the BHU

магистрант департамента строительства Инженерной академии РУДН, ассистент департамента гражданского строительства инженерного факультета УБХ

sdlami@yahoo.comhttps://orcid.org/0000-0001-9669-6177DabiGizachew M.ДабиГизачеу Мегерс

master of the Department of Civil Engineering, Academy of Engineering of the RUDN University, assistant lecturer in the Department of Civil Engineering, Institute of Technology of the AMU

магистрант департамента строительства Инженерной академии РУДН, ассистент департамента гражданского строительства Технологического института УАМ

sdlami@yahoo.comhttps://orcid.org/0000-0002-6752-4103BazaTewodros T.БазаТеводрос Темеде

master of the Department of Civil Engineering, Academy of Engineering of the RUDN University, assistant lecturer in the Department of Civil Engineering, Institute of Technology of the AMU

магистрант департамента строительства Инженерной академии РУДН, ассистент департамента гражданского строительства Технологического института УАМ

sdlami@yahoo.comhttps://orcid.org/0000-0003-2206-2563RynkovskayaMarina I.РынковскаяМарина Игоревна

Director of the Department of Civil Engineering, Academy of Engineering, PhD, Docent

директор департамента строительства Инженерной академии РУДН, к. т. н., доцент

sdlami@yahoo.comPeoples’ Friendship University of Russia (RUDN University)Российский университет дружбы народовBule Hora UniversityУниверситет Буле-ХорыArba Minch UniversityУниверситет Арба-Мынчы20072021172VOL 17, NO2 (2021)ТОМ 17, №2 (2021)18819820072021Copyright ©; 2021, Dereje L.S., Dabi G.M., Baza T.T., Rynkovskaya M.I.Copyright ©; 2021, Дередже Л.С., Даби Г.М., База Т.Т., Рынковская М.И.2021Dereje L.S., Dabi G.M., Baza T.T., Rynkovskaya M.I.Дередже Л.С., Даби Г.М., База Т.Т., Рынковская М.И.http://creativecommons.org/licenses/by/4.0https://journals.rudn.ru/structural-mechanics/article/view/27078

Building Information Modeling (BIM), in the last couple of decades, has emerged as a technology that can be used in combination with different methodologies in the fields of architecture, engineering, and construction industry as a digital model to facilitate the planning and design process, construction and maintenance. Using the tools of BIM, the stakeholders generate the digital models that can help them to identify the problems. A total of 24 conference papers, referenced journal articles, and other academic sources were analyzed based on their relevance and research focus areas. This article provides a review on the integration of building information modeling with different methodologies for seismic retrofitting of both structural and non-structural components of buildings. Pre-seismic and post-seismic applications of Building Information Modeling with the integration of different methodologies have been reviewed overbuilding life cycles with a view of addressing the challenges and recommending the future research perspectives. In the end, by stating the possibilities of integration of BIM tools with different methodologies mainly using Performance-Based Earthquake Engineering as a paradigm which is fully probabilistic, this paper concludes that the implication of the Building Information Modeling with the integration of different methodologies isn’t merely the inclusion of the certain conditions, but also of the numerical integration of all the possible uncertainties.

В последние несколько десятилетий появилась технология информационного моделирования зданий (BIM), которая может использоваться в сочетании с различными методологиями в области архитектуры, проектирования и строительства в качестве цифровой модели для облегчения процесса планирования и проектирования, строительства и технического обслуживания. Используя инструменты, заинтересованные стороны генерируют цифровые модели, способствующие определению проблемы. Опираясь на актуальность и направление исследований были проанализированы в общей сложности 24 доклада конференций, ссылки на журнальные статьи и другие академические источники. Представлен обзор интеграции информационного моделирования зданий с различными методологиями сейсмического переоснащения как структурных, так и неструктурных компонентов зданий. Предсейсмические и постсейсмические приложения информационного моделирования зданий с интеграцией различных методологий были рассмотрены в течение жизненного цикла зданий с целью решения проблем и рекомендации будущих перспектив исследований. Предполагая возможность интеграции инструментов BIM с различными методологиями, в основном использующими основанную на производительности сейсмотехнику (PBEE) в качестве парадигмы, которая является полностью вероятностной, делается вывод о том, что следствием информационного моделирования зданий с интеграцией различных методологий является не только включение определенных условий, но и численное интегрирование всех возможных неопределенностей.

ArchitectureEngineering & Construction CollectionBuilding Information Modellingseismic retrofittingbuilding life cycleproject cost estimatingbuilding maintenance cost optimizationпроектирование и строительствоинформационное моделирование зданийсейсмическое переоснащениежизненный цикл зданияоценка стоимости проектаоптимизация затрат на техническое обслуживание зданияBennett T.D. Role of BIM in infrastructure seismic retrofits. Structure. 2012;45:44-45.Cornell C.A., Krawinkler H. Progress and challenges in seismic performance. Assessment. PEER Center News. 2000;3(2):1-2.Lee T.-H., Mosalam K.M. Probabilistic seismic evaluation of reinforced concrete structural components and systems. Pacific Earthquake Engineering Research Center; 2006.Vitiello U., Ciotta V., Salzano A., Asprone D., Manfredi G., Cosenza E. BIM-based approach for the cost-optimization of seismic retrofit strategies on existing buildings. Automation in Construction. 2019;98:90-101. https://doi.org/10.1016/j.autcon.2018.10.023Azhar S., Nadeem A., Mok J., Leung B. Building Information Modeling (BIM): a new paradigm for visual interactive modeling and simulation for construction projects. Proceedings of First International Conference on Construction in Developing Countries. 2008:435-446.Succar B. Building information modelling framework: a research and delivery foundation for industry stakeholders. Automation in Construction. 2009;18:357-375. https://doi.org/10.1016/j.autcon.2008.10.003Azhar S., Khalfan M., Maqsood T. Building Information Modeling (BIM): now and beyond. Australasian Journal of Construction Economics and Building. 2012;12(4):15-28. https://doi.org/10.5130/ajceb.v12i4.3032Bryde D., Broquetas M., Volm J.M. The project benefits of building information modelling (BIM). International Journal of Project Management. 2013;31(7):971-980. https://doi.org/10.1016/j.ijproman.2012.12.001Dong R.-R. The application of BIM technology in building construction quality management and talent training. Eurasia Journal of Mathematics Science and Technology Education. 2017;13(7):4311-4317. https://doi.org/10.12973/eurasia.2017.00860aCao D., Li H. Linking the motivations and practices of design organizations to implement building information modeling in construction projects: empirical study in China. Journal of Management in Engineering. 2016;32(6):04016013. https://doi.org/10.1061/(ASCE)ME.1943-5479.0000453Chong H.-Y., Wang X. The outlook of building information modeling for sustainable development. Clean Technologies and Environmental Policy. 2016;18(6):1877-1887. https://doi.org/10.1007/s10098-016-1170-7Arayici Y., Coates S., Koskela L.J., Kagioglou M., et al. Technology adoption in the BIM implementation for lean architectural practice. Automation in Construction. 2011;20(2):189-195. https://doi.org/10.1016/j.autcon.2010.09.016Ratajczak J., Malacarne G., Krause D., Matt D. The BIM approach and stakeholders integration in the AEC sector - benefits and obstacles in South Tyrolean context. 4th International Workshop on Design in Civil and Environmental Engineering (DCEE). 2015:32-40.Razali M.F., Haron N.A., Salihudin H., et al. A review: application of Building Information Modelling (BIM) over building life cycles. IOP Conference Series: Earth and Environmental Science. 2019;357:012028. https://doi.org/10.1088/1755-1315/357/1/012028Di Giuda G.M., Villa V., Piantanida P. BIM and energy efficient retrofitting in school buildings. Energy Procedia. 2015;78:1045-1050. https://doi.org/10.1016/j.egypro.2015.11.066Musella C., Serra M., Salzano A., Menna C., Asprone D. Open BIM standards: a review of the processes for managing existing structures in the pre-and post-earthquake phases. CivilEng. 2020;1(3):291-309.Goulet C.A., Haselton C.B., Mitrani-Reiser J., Beck J.L., Deierlein G.G., Porter K.A., Stewart J.P. Evaluation of the seismic performance of a code-conforming reinforced-concrete frame building - from seismic hazard to collapse safety and economic losses. Earthq. Eng. Struct. Dyn. 2007;36:1973-1997.Motawa I., Almarshad A. A knowledge-based BIM system for building maintenance. Automation in Construction. 2013;29:173-182.Haselton C.B. Assessing seismic collapse safety of modern reinforced concrete moment frame buildings (Ph.D. Dissertation). Stanford University; 2006.Georgiou C., Vamvatsikos D., Christodoulou S. BIM-based damage assessment and scheduling for post-earthquake building rehabilitation. 10th European Conference on Product & Process Modelling (ECPPM2014). 2014.Zhen X., Furong Z., Wei J., et al. A 5D simulation method on post-earthquake repair process of buildings based on BIM. Earthq. Eng. Eng. Vib. 2020;19:541-560.Christodoulou S.E., Vamvatsikos D., Georgiou C. A BIM-based framework for forecasting and visualizing seismic damage. Cost and time to repair. University of Cyprus; 2010.Porter K.A., Kiremidjian A.S., LeGrue J.S. Assembly-based vulnerability of buildings and its use in performance evaluation. Earthquake Spectra. 2001;17(2):291-312. https://doi.org/10.1193/1.1586176Dolšek M., Fajfar P. IN2 - a simple alternative for IDA. 13th World Conference on Earthquake Engineering. Vancouver, B.C., Canada; 2004.