Structural Mechanics of Engineering Constructions and BuildingsStructural Mechanics of Engineering Constructions and Buildings1815-52352587-8700Peoples’ Friendship University of Russia named after Patrice Lumumba (RUDN University)15776Research ArticleTHE USE OF COMPUTER DYNAMIC SHAPING FOR MODELING OF ENGINEERING STRUCTURES AND BUILDINGSSHAMBINAS Lshambina_sl@mail.ruVIRCHENKOS Gservirchenko@gmail.comPeoples' Friendship University of Russia, MoscowNational Technical University of Ukraine «Igor Sikorsky Kiev Polytechnic Institute», Kiev1504201723711042017Copyright © 2017,2017<p>This article analyzes some aspects of the use of variant dynamic shaping for computeraided design of various engineering constructions and buildings. The proposed method is a further development of structural-parametric approach for geometric modeling of technical objects which was developed by scientific school of applied geometry National Technical University of Ukraine Igor Sikorsky Kiev Polytechnic Institute.</p>computer-aided designdynamic variant shapingengineering construc- tions and buildingsgeometric modelingавтоматизированное проектированиединамическое вариантное формообразованиеинженерные конструкции и сооружениягеометрическое моделирование[Li K. (2004) Osnovy SAPR (CAD/CAM/CAE), SPb.: Piter, 560 p.][Krivoshapko S.N., Mamiyeva I.A. (2012) Analiticheskie Poverkhnosti v Arkhitekture Zdanii, Konstruktcii i Izdelii. Moscow: Kn. Dom “LIBROKOM”. 328 p.][Lebedeva N.V. (2006) Fermy, Arki, Tonkostennye Prostranstvennye Konstruktcii. М.: Arhitektura – C. 120 p.][Mailian R.L., Mailian D.R., Veselev IU.A. (2005) Stroitel’nye Konstruktcii, Rostov n/D.: Feniks. 880 p.][Afanasev A.A., Arutiunov S.G., Afonin I.A. i dr. (2002) Tekhnologiia Vozvedeniia Polnosbornykh Zdanii. M.: Izd-vo ASV. 360 p.][Krivoshapko, S.N., Shambina, S.L. (2012) Design of developable surfaces and the application of twin-walled developable structures. Serbian Architectural Journal. Vol. 4. No. 3, Belgrad. P. 298—317.][Christian A. Bock Hyeng, Emmanuel B. Yamb. (2012) Application of Cyclic Shells in Architecture, Machine Design, and Bionics. International Journal of Modern Engineering Research, Vol. 2, Iss. 3. P. 799—806.][Vanin, V.V., Virchenko, G.A. (2009) Vyznachennia ta osnovni polozhennia strukturno-parametrychnogo geometrychnogo modeliuvannia. Geometrychne ta Komp’iuterne Modeliuvanni, Vyp. 23, Kharkiv: KHDUKHT. P. 42—48.][Vanin, V.V., Virchenko, S.G., Virchenko, G.I. (2014) Variantne modeliuvannia geometrychnykh ob’ektiv metodom poliparametrizatcii. Problemy Informatciinykh Tekhnologii, No 02 (016), Kherson: KHNTU. P. 76—79.][Vanin, V.V., Shambina, S.L, Virchenko, G.I. (2015) Variant computer shell prototyping based on polyparameterization of middle surfaces. Structural Mechanics of Engineering Constructions and Buildings. No 6. P. 3—8.][Ivanov V.N. Romanova V.А. (2016) Design of the Forms of Space Structures (Visualization of the Surfaces at MathCad and AutoCad: Monograph, Moscow: Izd-vo ASV. 412 p.]