Large-span structures in diploma projects of students architects of RUDN University

Cover Page

Abstract


At present, there is a renewed interest in the design and application of wall structures in architecture and construction. With the advent of modern computers, refined methods for calculating shells, new building materials, the development of differential geometry and the rapid growth of numerical methods of calculation, it became possible to create architectural masterpieces from shells of canonical and non-canonical forms, which can be the hallmark of a city or country. This emerging trend among young Russian and foreign specialists inspires optimism among scientists who are researching thin-walled shells. The article considers some results of the work of the Department of Civil Engineering of the Engineering Academy of the Peoples’ Friendship University of Russia on attracting students to architectural design and involving undergraduates in researches on architecture, the theory of thin-walled spatial structures and their application in construction and architecture. The publications of students in this field are presented.


About the authors

Iraida A. Mamieva

Peoples’ Friendship University of Russia (RUDN University)

Author for correspondence.
Email: i_mamieva@mail.ru
6 Miklukho-Maklaya St, Moscow, 117198, Russian Federation

Assistant Professor, Department of Civil Engineering, Engineering Academy

References

  1. Mamieva I.A. Scientific schools of engineering faculty of Peoples’ Friendship University of Russia. Structural Mechanics of Engineering Constructions and Buildings. 2009; (4):3–8. (In Russ.)
  2. Mamieva I.A. Contribution of chair of strength of materials and structures of RUDN in development of architecture and theory of analysis of thin-walled space structures. Structural Mechanics of Engineering Constructions and Buildings. 2011;(4):81–81. (In Russ.)
  3. Mamieva I.A. On teaching of specialists in architecture, geometry, and strength analysis of large-span space structures and shells. Building and Reconstruction. 2016;5(67): 114–118. (In Russ.)
  4. Ivanov V.N., Krivoshapko S.N. Analytical Methods of Analysis of Shells of Non-Canonical form: Monograph. Moscow: RUDN University Publ.; 2010. (In Russ.)
  5. Krivoshapko S.N., Galishnikova V.V. Architectural-and-Building Structures. Moscow: YuRAIT Publ.; 2015. (In Russ.)
  6. Grinko E.A. Survey works on geometry, durability, stability, dynamics, and application of environments with middle surfaces of various classes. Mont. i spetz. raboty v stroitelstve. 2012;(2):15–21. (In Russ.)
  7. Rynkovskaya M.I., Simo D. Cylindrical surfaces for social significant architectural projects in Cameroon. moNGeometrija 2012: Proceedings of 3rd International Scientific Conference (Serbia, Novi Sad, June 21st–24th 2012) (р. 487–498). Novi Sad; 2012.
  8. Salekh M.S. Application of modern techniques aided design for forming and calculation of erections of progressive architecture. Structural Mechanics of Engineering Constructions and Buildings. 2016;(6):8–13. (In Russ.)
  9. Mamieva I.A., Razin A.D. Parametricheskaya arkhitektura v Moskve [Parametrical architecture in Moscow]. Arkhitektura i stroitel’stvo Rossii [Architecture and Construction of Russia]. 2014;(6):24–29. (In Russ.)
  10. Kazaryan А.А. Geometric description of bionic forms in architecture. Prikladna geometriya, dizayn ta ob’ekti intelektual’noy vlasnosti: Materiali II-oy Mizhnarodnoy naukovo-praktichnoy konferentzii studentiv, aspirantiv ta molodikh vchenikh (issue 2, p. 82–84). Кiev: DIYa Publ.; 2013.
  11. Salekh M.S. Bionic and geometric morphogenesis in architecture of Santiago Calatrava. Strength, Creep, and Destruction of Building and Mechanical Materials and Structures: Proc. of International Scientific Youth Conference (November 18–21, 2014) (p. 288–292). Moscow: RUDN University Publ.; 2014. (In Russ.)
  12. Virchenko G.A., Shambina S.L. Computer variant surface modeling of bionic architectural forms. RUDN Journal of Engineering Researches. 2016;(3):79–83. (In Russ.)
  13. Ivanov V.N. Cyclic surfaces: geometry, classification, design of shells. Shells in Architecture and Strength Analysis of Thin-Walled Civil-Engineering and Machine-Building Constructions of Complex Forms: Proc. Int. Conf. (June 4–8, 2001, Moscow, Russia) (p. 126–134). Moscow: RUDN University Publ.; 2001. (In Russ.)
  14. Gubina E.N. About the formation of the most common cyclic surfaces. Strength, Creep, and Destruction of Building and Mechanical Materials and Structures: Proc. of International Scientific Youth Conference (November 18–21, 2014) (p. 320–324). Moscow: RUDN University Publ.; 2014. (In Russ.)
  15. Ivanov V.N., Shmeleva A.A. Geometry and formation of the thin-walled space shell structures on the base of normal cyclic surfaces. Structural Mechanics of Engineering Constructions and Buildings. 2016;(6):3–8. (In Russ.)
  16. Gafurova Yu.F., Filipova E.R. A Monge surface for design of gallery. Nauchnomu progressu – tvorchestvo molodykh [Creative Work of Youths for Scientific Progress]: Proc. of the IX International Youth Scientific Conference on Natural Scientific and Technical Branches of Science (Yoshkar-Ola, April 18–19, 2014) (p. 163–165). Yoshkar-Ola; 2014. (In Russ.)
  17. Ivanov V.N., Muxammad R. Geometry of carved Monge surface and shell structuring. Structural Mechanics of Engineering Constructions and Buildings. 2002;(1):27.
  18. Krivoshapko S.N. Geometry and strength of general helicoidal shells. Applied Mechanics Reviews. 1999;52(5): 161–175.
  19. Rynkovskaya M. On application and analysis of helicoidal shells in architecture and civil engineering. RUDN Journal of Engineering Researches. 2012;(4):84–90. (In Russ.)
  20. Tupikova E.M. Semi-analytical analysis of a long shallow oblique helicoidal shell in a non-orthogonal non-conjugate coordinate system. Structural Mechanics of Engineering Constructions and Buildings. 2016;(3):3–8. (In Russ.)
  21. Grishina А.А. On ruled helical surfaces. Strength, Creep, and Destruction of Building and Mechanical Materials and Structures: Proc. of International Scientific Youth Conference (November 18–21, 2014) (p. 316–319). Moscow: RUDN University Publ.; 2014. (In Russ.)
  22. Titsa L., Dragovich M., Kilibarda L., Milosevic M. Spiral structures in modern architecture. Modern problems of mechanics, energy efficiency of equipment and resource-saving technologies: Collection of scientific school-seminar of young scientists and students with international participation (Moscow, RUDN University, September 15–17, 2015) (p. 185–188). Moscow: RUDN University Publ.; 2015.
  23. Akili J., Grinko E.A. The application of topographic and continuously-topographic surfaces in mine surveying practice. Nauchnomu progressu – tvorchestvo molodykh [Creative Work of Youths for Scientific Progress]: Proc. of the IX International Youth Scientific Conference on Natural Scientific and Technical Branches of Science (Yoshkar-Ola, April 18–19, 2014) (p. 133–135). Yoshkar-Ola, 2014. (In Russ.)
  24. Akili J. Mathematical modelling of topographic and continuously-topographic surfaces. Strength, Creep, and Destruction of Building and Mechanical Materials and Structures: Proc. of International Scientific Youth Conference (November 18–21, 2014) (p. 330–334). Moscow: RUDN Publ.; 2014. (In Russ.)
  25. Krivoshapko S.N. Static analysis of shells with developable middle surfaces. Applied Mechanics Reviews. 1998; 51(12(1)):731–746.
  26. Aleshina O.O. Studies of geometry and calculation of torso shells of an equal slope. Structural Mechanics and Analysis of Constructions. 2019;(3):63–70. (In Russ.)
  27. Yakimchuk E.V. Using surface of hyperbolic paraboloid in architecture. Prikladna geometriya, dizayn ta ob’ekti intelektual’noy vlasnosti: materiali II-oy Mizhnarodnoy naukovo-praktichnoy konferentzii studentiv, aspirantiv ta molodikh vchenikh (issue 2, p. 209–213). Кiev: DIYa Publ.; 2013. (In Russ.)
  28. Krivoshapko S.N. Optimal shells of revolution and main optimizations. Structural Mechanics of Engineering Constructions and Buildings. 2019;15(3):201–209. http:// dx.doi.org/10.22363/1815-5235-2019-15-3-201-209
  29. Krivoshapko S.N. Shells of revolution of non-trivial forms. Izvestiya vysshikh uchebnykh zavedenii. Stroitel’stvo. 2018;7(715):66–79. (In Russ.)
  30. Borsenkova Yu.V. Chernikova V.V. Selection of optimal surface of revolution. Nauchnomu progressu – tvorchestvo molodykh [Creative Work of Youths for Scientific Progress]. 2018;(4):15–18. (In Russ.)
  31. Krivoshapko S.N., Bock Hyeng C.A., Mamieva I.A. Chronology of erection of the earliest reinforced concrete shells. International Journal of Research and Reviews in Applied Sciences. 2014;18(20):95–108.
  32. Krivoshapko S.N. The perspectives of application of thin-walled plastic and composite polymer shells in civil and industrial architecture. Journal of Reinforced Plastics and Composites. 2018;37(4):217–229. doi: 10.1177/073 1684417740770.
  33. Komarova I.A. The application of metal structures in 2002–2014. Nauchnomu progressu – tvorchestvo molodykh [Creative Work of Youths for Scientific Progress]: Proc. of the IX International Youth Scientific Conference on Natural Scientific and Technical Branches of Science (Yoshkar-Ola, April 18–19, 2014) (p. 174–175). Yoshkar-Ola; 2014. (In Russ.)
  34. Adegoke Muritala Adedapo. Advanced materials and technologies for energy efficient buildings. Strength, Creep, and Destruction of Building and Mechanical Materials and Structures: Proc. of International Scientific Youth Conference (November 18–21, 2014) (p. 198–204). Moscow: RUDN University Publ.; 2014. (In Russ.)
  35. Ponomareva А.А. Variety of space net structures from glued wood. Prikladna geometriya, dizayn ta ob’ekti intelektual’noy vlasnosti: materiali II-oy Mizhnarodnoy naukovo-praktichnoy konferentzii studentiv, aspirantiv ta molodikh vchenikh (issue 2, p. 244–246). Кiev: DIYa Publ.; 2013. (In Russ.)
  36. Khyeĭfets A.L., Samorukov A.V., Butorina I.V. On opportunity of architectural design on the base of analytical surfaces. Nauka YuUrGU. Sekzii technicheskih nauk: Materiali 63-iy nauchn. konf. (vol. 1, p. 187–190). Chelyabinsk; 2011. (In Russ.)
  37. Bradshaw R., Campbell D., Gargari M., Mirmiran A., Tripeny P. Special structures. Past, present, and future. Journal of Structural Engineering. 2002;128(6):691–701.

Statistics

Views

Abstract - 72

PDF (Russian) - 30

Cited-By


PlumX

Dimensions


Copyright (c) 2020 Mamieva I.A.

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies