No 1 (2013)

Articles

THE ANALYSIS OF THE STRESS-STRAIN STATE OF THE INTERSECTING CYLINDRICAL SHELLS FOR THE ELASTO – PLASTIC DEFORMATIONS WITH A VIEW OF GEOMETRICAL NONLINEARITY

Kositsyn S.B., Than H.L.

Abstract

В настоящей статье приведены результаты расчета тройникового соединения круговых цилиндрических оболочек, как в линейной, так и в геометрически нелинейной постановке, без учета и с учетом пластических деформаций по теории пластического течения при статическом нагружении, а также анализ напряженно-деформированного состояния оболочек. Использованы диаграммы деформирования материала раз- личного вида
Structural Mechanics of Engineering Constructions and Buildings. 2013;(1):3-9
pages 3-9 views

DYNAMICS OF IDEAL PLASTIC CIRCULAR PLATE WITH HINGED SUPPORT FIXED

Starov A.V.

Abstract

The problem of plastic deformation of circular plate with hinged support fixed under action of impact loading in view of physical and geometrical nonlinearities is considered. Systems of the resolving equations are received, the algorithm and the program of numerical realization of a problem on the basis of a method of final differences is developed
Structural Mechanics of Engineering Constructions and Buildings. 2013;(1):9-15
pages 9-15 views

INTENSIFICATION OF PROCESSES OF ROLLING

Kohun L.S., Morozov Y.A.

Abstract

He final choice of a mode of rolling is connected with possibility of increase in loading at preservation of a discontinuity of a material. The main criterion defining the moment of destruction, the size of shift deformation which shouldn't exceed a resource of plasticity of this material is.
Structural Mechanics of Engineering Constructions and Buildings. 2013;(1):15-18
pages 15-18 views

RESOLVING EQUATIONS OF THE BOUNDARY INTEGRAL APPROACH FOR THE PROBLEM OF INTERACTION OF A FINITE BODY WITH HALF-PLANE

Nizomov J.N., Hojiboev A.A., Hojiboev O.A.

Abstract

A problem of interactions of structure with ground by boundary integral approach is solved in present article
Structural Mechanics of Engineering Constructions and Buildings. 2013;(1):19-24
pages 19-24 views

COMPARING THE RESULTS OF THE THIN-WALLED BAR TORSION PROBLEM ACCORDING TO VLASOV AND SLIVKER THEORIES

Dyakov S.F.

Abstract

Using complicated multi-element constructions while designing civil structures and bridges consisted of thin-walled bars with open cross-section faces problems connected with the constricted-torsion. Solution for the differential equation of the twisted thin-walled bar with allowance for shearing is obtained and compared to the classical Vlasov's theory.
Structural Mechanics of Engineering Constructions and Buildings. 2013;(1):24-31
pages 24-31 views

ALCULATION OF SPATIAL INELASTIC COMPOSITE RODS

Rochev A.A.

Abstract

Petrozavodskiy Gosudarstvenniy Universitet, Petrozavodsk We consider the calculation of the spatial component of inelastic rods of variable cross section along the length of the variable stiffness of the shear ties. The basis of the decision is an overall theory of elastic composite rods of A.R. Rzhanitsyn operating the space. An expres- sion for determining compliance with the shutters-rods under torsion takes into account the in- elastic work of branches and structural connections to the length of the rod panel.
Structural Mechanics of Engineering Constructions and Buildings. 2013;(1):32-37
pages 32-37 views

ELASTIC AND PLASTIC DEFORMATION OF STRENGTHENED FERRO-CONCRETE CONSTRUCTIONS

Serazutdinov M.N., Ubaydulloyev M.N.

Abstract

The article presents the variational method for stress-strain state evaluation of ferro-concrete beam structures strengthening under load. The presented method allows us to con sider the changes of cross sectional sizes, existence of repair stresses, tension imposing, resulting from the reinforcement of a structure. The calculation results illustrating features of tension of the strengthened ferro-concrete construction were given.
Structural Mechanics of Engineering Constructions and Buildings. 2013;(1):38-44
pages 38-44 views

THE DETERMINATION OF POSSIBILITY OF LOSS OF STRENGTH OF ARCH MADE OF U-SHAPE PROFILES WITH REDUCED GEOMETRICAL CHARACTERISTICS

Veselev Y.A., Karabutov M.S.

Abstract

In the scope of the paper, there were carried out calculations of highest possible load and probability of fail-safe functioning of thin sheet rolled-on profiles vault. The actuality of the research is caused by comprehensive study' insufficiency of thin sheet rolled-on U-form profiles vault's functioning reliability. The theoretical and methodological bases of the research are the theories of highest normal tensions and maximum strained conditions as well. In the course of the probability of the construction strength's failure's research there were applied modern software tools' means as Lira and SolidWorks. The results are the values of the highest possible thin sheet rolled-on profiles vault with reduced geometry features load and initial construction reliability. Results earned enabled to make a conclusion of insufficient vault's reliability.
Structural Mechanics of Engineering Constructions and Buildings. 2013;(1):45-51
pages 45-51 views

ON OPPORTUNITY OF SHELL STRUCTURES IN MODERN ARCHITECTURE AND BUILDING

Krivoshapko S.N.

Abstract

The opportunity of wide application of large-span space structures in modern architecture and build ing of civil, industrial, and public buildings is analyzed. The opinions of well-known scientists, architects, and designers are given. The most interesting shell structures of last years are presented.
Structural Mechanics of Engineering Constructions and Buildings. 2013;(1):51-56
pages 51-56 views

ON NATURAL FLEXURAL VIBRATIONS IN A STEPWISE CANTILEVER BEAM WITH AN ATTACHED DISTRIBUTED MASS

Khakimov A.G.

Abstract

Consideration is given to natural flexural vibrations in a stepwise cantilever beam with an attached distributed mass. The research shows that an increase in the initial coordinate of the distributed mass results in greater natural vibration frequencies within the parameter range in question. It has been found that as the ratio of the moments of inertia becomes greater, the first natural vibration frequency increases and the second and third ones decrease. The solu- tion of an inverse problem allows one to determine the initial coordinate, the magnitude of the attached distributed mass and also the ratio of the moments of inertia using three lowermost natural frequencies of flexural vibrations
Structural Mechanics of Engineering Constructions and Buildings. 2013;(1):57-65
pages 57-65 views

DISCREET METHOD FOR DERIVATION OF FORMULAS FOR FREE CYCLIC FREQUENCIES OF OSCILLATING BARS WITH DISTRIBUTED MASSES

Borzyg E.P.

Abstract

The paper deals with the problem of automated derivation of the formulas for natural frequencies of a bar with arbitrary boundary conditions
Structural Mechanics of Engineering Constructions and Buildings. 2013;(1):64-65
pages 64-65 views

CALCULATED RESEARCH FOR CLARIFYING PHYSICAL AND MECHANICAL CHARACTERISTICS OF THE HYDRAULIC STRUCTURES BEDROCK FOUNDATION, MADE ON IN-SITU DATA

Shestopalov P.V.

Abstract

Definition of the real physical and mechanical characteristics for the bedrock foundations of the hydraulic structures appears to be a crucial task. It begins to be a problem number one if the construction period is prolonged and causes deterioration of the foundation. The method of definition is suggested as clarification of the physical and mechanical characteristics for the bedrock foundations of the hydraulic structures on the basis of the numerical (finite element) modeling of the "structure-foundation" system strain-stress state, taking into account the field data studies which were made during specific construction phases. The data on the Boguchany HPP concrete dam are presented as the results of the calculated clarification of the physical and mechanical characteristics for the bedrock foundations.
Structural Mechanics of Engineering Constructions and Buildings. 2013;(1):66-73
pages 66-73 views

TECHNICAL WELL DRILLING FOR SECURING OF WET SOILS BY THE METHOD OF JET CEMENTATION

Shelkovnikov I.G., Shtepa I.V.

Abstract

More and more attention is paid to a perspective technology as jet cementation. The drilling of technical wells for artificial strengthening of soils finds wide application not only in industrial building but and in mine building. A method of block of water-bearing levels with the help of a technology presented has the large potential for the building of mine shafts in the process of erection of tunnels.
Structural Mechanics of Engineering Constructions and Buildings. 2013;(1):73-77
pages 73-77 views

IDENTIFICATION OF DYNAMIC CALCULATION PARAMETERS OF STRUCTURES ON AN EXAMPLE OF BUILDING OF THE SKI STADIUM

Kolesnikov A.V.

Abstract

The technique of constructing the impulse response function for the problems of identifi- cation of dynamic parameters of the structures on the example of building stadiums for the ski is presented. The results of theoretical and experimental researches are given. A comparison of methods is shown also.
Structural Mechanics of Engineering Constructions and Buildings. 2013;(1):77-80
pages 77-80 views

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies